{"title":"Aquarium Water Pumps","description":"\u003cp\u003eSubmersible water pumps, powerheads and wavemakers for circulation and water changes. \u003ca href=\"\/collections\/hygger\"\u003ehygger\u003c\/a\u003e, JEREPET and Jebao are among the 14 brands stocked here. Options cover wave maker, off system and flow controller, among others.\u003c\/p\u003e\u003cp\u003eBack to \u003ca href=\"\/collections\/aquarium-filters-pumps\"\u003eAquarium Filters \u0026amp; Pumps\u003c\/a\u003e, alongside \u003ca href=\"\/collections\/aquarium-filters\"\u003eAquarium Filters\u003c\/a\u003e, \u003ca href=\"\/collections\/filter-media\"\u003eFilter Media \u0026amp; Replacement Cartridges\u003c\/a\u003e and \u003ca href=\"\/collections\/aquarium-air-pumps\"\u003eAir Pumps \u0026amp; Airline Accessories\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"aqqa-aquarium-wave-maker-circulation-pump-dc-12v-400-950-gph","title":"AQQA Aquarium Wave Maker Circulation Pump, DC 12V, 400–950 GPH","description":"\u003cp\u003e\u003cstrong\u003eThe AQQA Magnetic Wave Maker is an adjustable aquarium circulation pump designed to create wave-like water movement, with a DC 12V motor and flow settings from 400–950 GPH (1500–3600 L\/H).\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour speed settings with LED indicators — adjust the water flow using the controller’s plus and minus buttons.\u003c\/li\u003e\n\u003cli\u003eMagnetic mount for glass tanks up to 3\/5 inch (15 mm) thick — position the pump without drilling or suction cups.\u003c\/li\u003e\n\u003cli\u003eFeeding Mode pauses the pump for 10 seconds — give fish time to feed before circulation resumes automatically.\u003c\/li\u003e\n\u003cli\u003ePower use of 3W to 8W and operating noise below 30dB — run circulation with low power consumption and quiet operation.\u003c\/li\u003e\n\u003cli\u003eIP68 waterproofing and an ABS body — use the fully submersible pump in freshwater or saltwater aquariums.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAquarium water movement helps address still areas and water stratification while supporting oxygen levels and filtration efficiency. The AQQA wave maker is made for reef and coral tanks, planted aquariums, and large freshwater setups where adjustable circulation is useful. Its controllable flow lets you choose between four speeds, while the feeding control offers a brief pause in circulation without requiring the pump to be switched off manually for the full feeding period.\u003c\/p\u003e\u003ch3\u003eHow does the AQQA wave maker circulate aquarium water?\u003c\/h3\u003e\u003cp\u003eIt creates adjustable flow to help prevent water stratification, increase oxygen levels, and improve filtration efficiency. Wave-like currents are particularly relevant in reef and coral aquariums, where water movement supports coral growth and waste removal. Choose among the four flow settings with the controller’s plus and minus buttons; each setting has an LED indicator so you can see the selected speed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlow range: 400–950 GPH (1500–3600 L\/H).\u003c\/li\u003e\n\u003cli\u003eDesigned for reef and coral, planted, and large freshwater aquariums.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWill the magnetic mount fit my aquarium glass?\u003c\/h3\u003e\u003cp\u003eThe magnetic base attaches to glass tanks up to 3\/5 inch (15 mm) thick and allows flexible positioning without drilling or suction cups. Before choosing a position, compare your aquarium glass thickness with this maximum. The pump is designed to create water movement in different corners of the aquarium, so its placement can be adjusted to suit the tank.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMounting method: magnetic base.\u003c\/li\u003e\n\u003cli\u003eMaximum glass thickness: 3\/5 inch (15 mm).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow does Feeding Mode work?\u003c\/h3\u003e\u003cp\u003ePress and hold the controller button for 5 seconds to activate Feeding Mode; the pump pauses for 10 seconds and then resumes automatically. An indicator light turns on during the mode. For everyday flow adjustment, use the plus and minus buttons to move between the four speed settings, each marked by an LED indicator.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFeeding Mode activation: 5-second long press.\u003c\/li\u003e\n\u003cli\u003eAutomatic pause: 10 seconds, followed by resumed operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat power and water conditions is it designed for?\u003c\/h3\u003e\u003cp\u003eThe pump uses a DC 12V motor with an input of 110–240V, 50–60Hz. It consumes 3W to 8W and operates below 30dB; its power consumption is claimed to be up to 50% lower than traditional AC pumps. IP68 waterproofing makes the pump fully submersible, and its ABS body is described as resistant to corrosion and impact for freshwater and saltwater use. Always submerge the pump in water before turning it on to protect the motor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMotor: DC 12V; input: 110–240V, 50–60Hz.\u003c\/li\u003e\n\u003cli\u003eBody material: ABS; waterproof rating: IP68.\u003c\/li\u003e\n\u003cli\u003eSubmerge before switching on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe AQQA Magnetic Wave Maker suits aquarium keepers who want adjustable circulation for reef and coral tanks, planted aquariums, or large freshwater setups, along with a magnetic mount for compatible glass. Its four speeds, timed feeding pause, and fully submersible design bring controllable water movement to those aquarium environments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How thick can the aquarium glass be for the AQQA Magnetic Wave Maker?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The AQQA Magnetic Wave Maker attaches magnetically to glass tanks up to 3\/5 inch (15 mm) thick.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I activate Feeding Mode on the AQQA Magnetic Wave Maker?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Hold the AQQA Magnetic Wave Maker controller button for 5 seconds; the pump pauses for 10 seconds, then resumes automatically.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AQQA","offers":[{"title":"Default Title","offer_id":55660877545815,"sku":"B0FP1JBWY5","price":60.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/aqqa-magnetic-wave-maker-front-view.jpg?v=1793329367"},{"product_id":"lazybone-aqua-aquarium-auto-top-off-system-for-saltwater-freshwater-tanks-with-adaptive-refill","title":"LAZYBONE AQUA Aquarium Auto Top-Off System for Saltwater \u0026 Freshwater Tanks with Adaptive Refill","description":"\u003cp\u003e\u003cstrong\u003eLAZYBONE AQUA is an automatic top-off system for saltwater and freshwater aquariums, with an integrated controller probe and a pump with dry-run and overflow protection.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSaltwater and freshwater aquarium use — designed to automatically replace evaporated water.\u003c\/li\u003e\n\u003cli\u003eController integrated into one compact probe — no separate external controller box is needed.\u003c\/li\u003e\n\u003cli\u003eAI-powered adaptive learning — adjusts refill timing to the aquarium’s evaporation and reduces unnecessary pump cycles.\u003c\/li\u003e\n\u003cli\u003eOne-piece, double-layer sealed probe — designed to keep out moisture and prevent salt creep.\u003c\/li\u003e\n\u003cli\u003eDry-run shutoff, high-level overflow sensor, and two-year probe warranty — built-in safeguards plus stated warranty coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEvaporation means aquarium water levels need replenishing. LAZYBONE AQUA is made to automate that task in reef, saltwater, and freshwater tanks, while adapting refill timing to the tank rather than relying on a separate controller box. The system combines a probe and pump with safeguards for low reservoir water and a high water level.\u003c\/p\u003e\n\u003ch3\u003eWhat aquariums is LAZYBONE AQUA designed for?\u003c\/h3\u003e\n\u003cp\u003eLAZYBONE AQUA is designed for both saltwater and freshwater aquariums, including reef tanks. Its automatic top-off function replenishes water as the system adjusts refill timing to the aquarium’s evaporation. That adaptive timing is intended to reduce unnecessary pump cycles and extend pump life.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for saltwater and freshwater aquarium setups.\u003c\/li\u003e\n\u003cli\u003eAI-powered learning adjusts refill timing based on evaporation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow does the integrated probe differ from a separate-box system?\u003c\/h3\u003e\n\u003cp\u003eThe controller is built into a single compact probe, instead of using separate controller parts and an external box. Its one-piece body has a double-layer seal designed to prevent salt creep and moisture intrusion that could short the system. The integrated layout brings the controller into the probe itself.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle integrated probe design.\u003c\/li\u003e\n\u003cli\u003eDouble-layer sealed probe body.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat pump and overflow protections are included?\u003c\/h3\u003e\n\u003cp\u003eThe custom pump draws water from a lower level in the reservoir and shuts off automatically if the reservoir runs dry. A separate high-level sensor cuts power to prevent an aquarium overflow. These protections address both a depleted water source and a rising tank water level.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic pump shutoff when water runs out.\u003c\/li\u003e\n\u003cli\u003eHigh-level sensor that cuts power to prevent floods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLAZYBONE AQUA suits aquarium keepers who want automatic top-off for a saltwater, freshwater, or reef tank, with adaptive refill timing and built-in pump safeguards. The integrated probe, custom pump, and stated two-year probe and one-year pump warranties are the defining features of this system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the LAZYBONE AQUA ATO be used with saltwater and freshwater aquariums?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. LAZYBONE AQUA is designed for both saltwater and freshwater aquariums, including reef tanks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What protections does the LAZYBONE AQUA ATO include?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The LAZYBONE AQUA ATO pump shuts off if its reservoir runs dry, and a high-level sensor cuts power to help prevent aquarium overflow.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LAZYBONE AQUA","offers":[{"title":"Default Title","offer_id":55661242122583,"sku":"B0CZH8WH7J","price":57.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/lazybone-aqua-ato-system-front-view.jpg?v=1793331798"},{"product_id":"senstree-digiten-automatic-aquarium-top-off-system-with-dual-float-control-and-pump","title":"SENSTREE DIGITEN Automatic Aquarium Top Off System with Dual-Float Control and Pump","description":"\u003cp\u003e\u003cstrong\u003eThe SENSTREE DIGITEN automatic aquarium top off system maintains sump water levels by activating its included pump when water falls below the minimum level and stopping at the maximum.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual-float relay control — starts and stops the pump at set water levels, with a second float as backup.\u003c\/li\u003e\n\u003cli\u003eAdjustable holder fits aquarium walls up to 5\/8 inch (16 mm) thick — helps position the sensors at different water levels.\u003c\/li\u003e\n\u003cli\u003eWater-level range of 0–6.7 inches (0–17 cm) from the top of the sump — accommodates a range of sump setups.\u003c\/li\u003e\n\u003cli\u003eIncludes the pump and an ETL-listed power adapter — provides the key powered components for setup.\u003c\/li\u003e\n\u003cli\u003e12-month warranty — includes a stated warranty period for the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEvaporation can lower water in an aquarium sump and make regular top-ups part of tank care. This automatic top off system is made for aquariums, fish tanks, and sumps, including sumps with substantial evaporation. Its sensor-controlled pump automatically adds water as needed, helping keep the sump water level stable without requiring manual refilling each time the level drops.\u003c\/p\u003e\n\u003ch3\u003eHow does the SENSTREE DIGITEN system control the water level?\u003c\/h3\u003e\n\u003cp\u003eThe dual-float relay switches the pump on when water drops below the minimum level and switches it off when the water reaches the maximum. A second float is available as a backup if the first float fails, providing an additional level of overfill protection. The water-level control has no moving parts that can fail.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic pump activation and shutoff are controlled by the water level.\u003c\/li\u003e\n\u003cli\u003eThe holder’s adjustable bracket allows different sensor positions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill the holder fit my aquarium or sump?\u003c\/h3\u003e\n\u003cp\u003eThe holder fits aquarium walls up to 5\/8 inch (16 mm) thick, and the system’s water-level range is 0–6.7 inches (0–17 cm) from the top of the sump. The holder is made from PC material and is designed to help prevent movement. Compare your aquarium wall thickness and sump water-level range with these measurements when choosing a position.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for aquariums, fish tanks, and sumps.\u003c\/li\u003e\n\u003cli\u003eThe adjustable holder supports positioning for different water levels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat is included, and how should the water line be set up?\u003c\/h3\u003e\n\u003cp\u003eThe complete kit includes a pump and an ETL-listed power adapter, along with the parts needed for installation. Installation and maintenance are designed to be straightforward. A siphon break is an optional installation part, but it must be installed at the end of the water supply pipe if that pipe end is left in water, to prevent siphoning after the pump shuts off.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor the recommended arrangement, keep the display tank water level higher than the reservoir.\u003c\/li\u003e\n\u003cli\u003eDo not leave the water supply pipe end submerged unless the siphon break is installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe SENSTREE DIGITEN system suits aquarium owners who want automatic top-offs for a tank or sump, particularly where evaporation is substantial. Its included pump, dual-float level control, adjustable holder, and 12-month warranty make it a specified complete-kit option for maintaining sump water levels.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What aquarium wall thickness does the SENSTREE DIGITEN automatic top off system fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The SENSTREE DIGITEN automatic top off system fits aquarium walls up to 5\/8 inch (16 mm) thick, with an adjustable holder for positioning the sensors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How does the SENSTREE DIGITEN automatic top off system prevent overfilling?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The SENSTREE DIGITEN automatic top off system uses a dual-float relay: the pump turns on below the minimum water level and stops at the maximum, with a second float as backup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SENSTREE","offers":[{"title":"Default Title","offer_id":55662950646103,"sku":"B095JPMG5X","price":60.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/senstree-aquarium-auto-top-off-system-front-view.jpg?v=1793341268"},{"product_id":"marineland-maxi-jet-1200-aquarium-pump-295-1300-gph-multi-use-circulation","title":"MarineLand Maxi-Jet 1200 Aquarium Pump, 295–1300 GPH Multi-Use Circulation","description":"\u003cp\u003e\u003cstrong\u003eMarineLand Maxi-Jet 1200 is a multi-use aquarium pump that works as a powerhead, utility pump, or circulation pump, with a flow rate of 295 to 1300 GPH.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThree pump functions in one unit — choose a powerhead, utility pump, or circulation pump for different aquarium tasks.\u003c\/li\u003e\n\u003cli\u003eFlow rate of 295 to 1300 GPH — select the Maxi-Jet 1200 for the flow range that suits your setup.\u003c\/li\u003e\n\u003cli\u003eProp-style circulation conversion kit included — convert the powerhead for water movement inside the aquarium.\u003c\/li\u003e\n\u003cli\u003eVenturi pump with adjustable aeration — adjust aeration as part of pump operation.\u003c\/li\u003e\n\u003cli\u003eSupports undergravel filters, protein skimmers, calcium reactors, and refugiums — use it with a range of aquarium equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOne aquarium setup can call for filtration support, water circulation, or a pump for connected equipment. The Maxi-Jet 1200 brings three pump functions together, with uses that also include running small fountains and operating with wave maker timers. Its conversion kit adds a prop-style circulation option for movement within the aquarium.\u003c\/p\u003e\u003ch3\u003eWhat can the MarineLand Maxi-Jet 1200 power?\u003c\/h3\u003e\u003cp\u003eThe MarineLand Maxi-Jet 1200 can power undergravel filters, protein skimmers, calcium reactors, and refugiums. It can also run small fountains and work with wave maker timers, making it suited to aquarium equipment and other small water movement setups.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse it as a powerhead for undergravel filters.\u003c\/li\u003e\n\u003cli\u003eRun protein skimmers, calcium reactors, and refugiums.\u003c\/li\u003e\n\u003cli\u003eUse it with wave maker timers or small fountains.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow does the circulation pump option work?\u003c\/h3\u003e\u003cp\u003eThe MarineLand Maxi-Jet 1200 includes a conversion kit that changes the powerhead into a prop-style circulation pump. This mode is designed to move water inside the aquarium while using the least amount of energy.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConversion kit comes in the box.\u003c\/li\u003e\n\u003cli\u003eProp-style design provides an additional aquarium circulation mode.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat flow rate and aeration does it offer?\u003c\/h3\u003e\u003cp\u003eThe MarineLand Maxi-Jet 1200 has a flow range of 295 to 1300 GPH and uses a venturi pump for fully adjustable aeration. The Maxi-Jet range has four flow options: the 400 runs at 110 to 500 GPH, the 600 at 160 to 750 GPH, the 900 at 230 to 1000 GPH, and the 1200 at 295 to 1300 GPH.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaxi-Jet 400: 110 to 500 GPH.\u003c\/li\u003e\n\u003cli\u003eMaxi-Jet 600: 160 to 750 GPH.\u003c\/li\u003e\n\u003cli\u003eMaxi-Jet 900: 230 to 1000 GPH.\u003c\/li\u003e\n\u003cli\u003eMaxi-Jet 1200: 295 to 1300 GPH.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe MarineLand Maxi-Jet 1200 suits aquarium keepers who want one pump for several equipment tasks and a choice of powerhead or prop-style circulation operation. It combines a 295 to 1300 GPH flow range with a conversion kit for aquarium water movement.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What can the MarineLand Maxi-Jet 1200 be used for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The MarineLand Maxi-Jet 1200 works as a powerhead, utility pump, or circulation pump and can power undergravel filters, protein skimmers, calcium reactors, and refugiums.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the MarineLand Maxi-Jet 1200 include a circulation conversion kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The MarineLand Maxi-Jet 1200 includes a conversion kit that turns the powerhead into a prop-style circulation pump for aquarium water movement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MarineLand","offers":[{"title":"Default Title","offer_id":55666607653207,"sku":"B004IMPOJ8","price":36.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/marineland-maxi-jet-water-pump-front-view.jpg?v=1793372070"},{"product_id":"charmshine-submersible-pond-pump-50w-1060-gph-with-5-nozzles-filter","title":"Charmshine Submersible Pond Pump, 50W 1060 GPH with 5 Nozzles \u0026 Filter","description":"\u003cp\u003e\u003cstrong\u003eCharmshine is a 50W submersible water pump for ponds, fountains, fish tanks and hydroponics, with adjustable flow up to 1060 GPH (4000 L\/H).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8.2 ft (2.5 m) power cord — gives you extra reach for outdoor setups.\u003c\/li\u003e\n\u003cli\u003eDetachable fine-mesh filter bag — catches debris before it can clog the impeller.\u003c\/li\u003e\n\u003cli\u003eFive included nozzles and an adjustable flow knob — let you set up the outlet and control water flow.\u003c\/li\u003e\n\u003cli\u003eEpoxy-sealed ceramic shaft motor — supports corrosion resistance and waterproof operation.\u003c\/li\u003e\n\u003cli\u003e12-month warranty — covers the pump for its first year of use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMoving water in a pond, fountain, aquarium or hydroponic setup calls for a pump that can circulate water while fitting the installation. Charmshine combines a submersible design with adjustable flow, several nozzle options and a filter bag, so you can configure it for different water-circulation needs. Its long power cord is intended for outdoor use and larger fish tanks as well as fountains and ponds.\u003c\/p\u003e\n\u003ch3\u003eHow much water can the Charmshine pond pump move?\u003c\/h3\u003e\n\u003cp\u003eThe pump delivers up to 1060 GPH (4000 L\/H) and a maximum lift of 11.4 ft (3.5 m). Use the built-in flow knob to adjust output for your setup, whether you are circulating water in a fountain, aquarium or hydroponic system. The pump is rated at 50W, and its submersible design suits installations where the pump operates underwater.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlow rate: up to 1060 GPH (4000 L\/H).\u003c\/li\u003e\n\u003cli\u003eMaximum lift: 11.4 ft (3.5 m).\u003c\/li\u003e\n\u003cli\u003eUse the adjustable knob to control water flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich hoses fit the five included nozzles?\u003c\/h3\u003e\n\u003cp\u003eThe five nozzles fit hoses with these inside diameters: 1\/2 in (0.51 in; 12.7 mm), 5\/8 in (0.63 in; 15.9 mm), 3\/4 in (0.75 in; 19.1 mm), 7\/8 in (0.87 in; 22.2 mm) and 1 in (25.4 mm). Choose the nozzle to match your hose’s inside diameter; the hose itself is not included.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFive nozzle sizes are included for different hose connections.\u003c\/li\u003e\n\u003cli\u003eCompare the listed inside diameter with your hose before setting up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow does the filter help with pump maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe detachable ultra-fine mesh filter bag blocks debris from reaching the impeller, helping reduce clogging and the frequency of maintenance. The manufacturer says the filter-bag design can extend pump service life to more than twice that of pumps without a filter bag. The bag detaches for cleaning.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMesh filtration helps keep debris away from the impeller.\u003c\/li\u003e\n\u003cli\u003eThe filter bag can be removed for maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs the motor suited to continuous water circulation?\u003c\/h3\u003e\n\u003cp\u003eThe motor uses an epoxy-sealed ceramic shaft and is designed for corrosion resistance and waterproof performance. It runs at less than 35 dB for quiet water circulation, and its parts can be disassembled for cleaning without tools. For outdoor reach, the 8.2 ft (2.5 m) cord is 2.2 ft (0.67 m) longer than the market-standard cord cited by the manufacturer and ends in a three-prong plug.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTool-free disassembly makes motor cleaning straightforward.\u003c\/li\u003e\n\u003cli\u003eA 12-month warranty is included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCharmshine suits pond and fountain owners, fish-tank setups and hydroponic systems that need submersible water circulation with adjustable output. It is especially suited to installations that can use one of the five nozzle sizes and benefit from a detachable debris filter. The pump combines up to 1060 GPH flow, a 11.4 ft maximum lift and an 8.2 ft cord in one submersible unit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hose sizes fit the Charmshine submersible pond pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Charmshine submersible pond pump includes five nozzles for 1\/2 in, 5\/8 in, 3\/4 in, 7\/8 in and 1 in inside-diameter hoses. The hose is not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the Charmshine pond pump flow rate be adjusted?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Charmshine pond pump has a built-in adjustable flow knob and moves up to 1060 GPH (4000 L\/H), with a maximum lift of 11.4 ft (3.5 m).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"charmshine","offers":[{"title":"Default Title","offer_id":55676056961367,"sku":"B0GGMNJM8S","price":59.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/charmshine-pond-pump-front-view.jpg?v=1793395414"},{"product_id":"hibctr-12v-brushless-water-pump-5-pack-240l-h-3m-lift-ip68","title":"hiBCTR 12V Brushless Water Pump 5-Pack, 240L\/H, 3M Lift, IP68","description":"\u003cp\u003ehiBCTR 5-Pack 12V Brushless Water Pumps are compact pumps for continuous water circulation, with a maximum flow rate of 240L\/H and a maximum lift height of 3M.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFive DC 12V brushless pumps in one pack — equip multiple circulation points or keep pumps available for separate projects.\u003c\/li\u003e\n\u003cli\u003eMaximum flow of 240L\/H and maximum lift of 3M — supports water movement in compact circulation setups.\u003c\/li\u003e\n\u003cli\u003eBrushless permanent magnetic rotor and ceramic shaft, with a working life of over 30,000 hours — made for extended operation.\u003c\/li\u003e\n\u003cli\u003eIP68 waterproof rating and sealed ABS housing — suitable for complete submersion during operation.\u003c\/li\u003e\n\u003cli\u003eCompact 5.5 x 3.5 x 4.5 cm size — fits into small spaces and custom projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSmall circulation projects often need a pump that can sit inside a limited space while running steadily over time. These hiBCTR pumps are designed for continuous-use applications, including custom builds that need water moved through a compact setup. Their submersible construction, 12V DC operation and stated fluid compatibility make them suited to a range of practical pumping arrangements.\u003c\/p\u003e\n\u003ch3\u003eWhat flow and lift can each pump provide?\u003c\/h3\u003e\n\u003cp\u003eEach hiBCTR brushless water pump has a maximum flow rate of 240L\/H, also given as 4L\/MIN or 1.06G\/MIN, and a maximum lift height (head) of 3M. These maximum ratings help you assess whether the pump matches the flow and vertical movement your setup requires. The pump runs on 4.2W with a maximum rated current of 350mA, for 12V DC applications that need water circulation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated voltage: DC 12V.\u003c\/li\u003e\n\u003cli\u003eMaximum rated current: 350mA.\u003c\/li\u003e\n\u003cli\u003eDesigned for continuous-use water circulation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan the hiBCTR pump run fully underwater?\u003c\/h3\u003e\n\u003cp\u003eYes, its IP68 waterproof rating allows complete submersion, and the pump housing is made from ABS plastic for operation in water. Static sealing is used to help prevent leaks; the design is not based on dynamic sealing. For a close-fitting custom build, the pump measures 5.5 x 3.5 x 4.5 cm, so compare those dimensions with the available installation space.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating temperature range: 0 ~ 75℃.\u003c\/li\u003e\n\u003cli\u003eFluid compatibility includes water, oil, gasoline and acid\/alkali solutions.\u003c\/li\u003e\n\u003cli\u003eCompact dimensions suit small-space projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat makes this pump suited to extended operation?\u003c\/h3\u003e\n\u003cp\u003eThe pump uses a brushless permanent magnetic rotor and a high-performance ceramic shaft, with a stated working life of over 30,000 hours. Its operating noise is less than 35dB, a useful consideration when a circulation pump will run in a setting where quieter operation matters. Together, these design details support use in applications that call for ongoing circulation rather than occasional short runs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrushless motor design with a permanent magnetic rotor.\u003c\/li\u003e\n\u003cli\u003eCeramic shaft.\u003c\/li\u003e\n\u003cli\u003eNoise level below 35dB.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach pump can be powered by a 12V DC source such as a solar panel, battery or wall adapter, giving project builders several power-source options. The five-pump set is a practical fit for people assembling compact circulation projects or setting up more than one pump. Digital documentation and technical support are available for setup, programming and troubleshooting. For buyers who need small, submersible pumps for continuous circulation, this set combines 12V DC operation, compact dimensions and a brushless design.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the hiBCTR 5-Pack Brushless Water Pump set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hiBCTR 5-Pack includes five DC 12V brushless water pumps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What can power a hiBCTR brushless water pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A hiBCTR brushless water pump runs on 12V DC and can use a solar panel, battery or wall adapter as its power source.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"hiBCTR","offers":[{"title":"Default Title","offer_id":55677606592855,"sku":"B0FCF6MV25","price":43.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/hibctr-brushless-water-pump-front-view.jpg?v=1793399385"},{"product_id":"hygger-submersible-water-pump-530-gph-20w-with-flow-controller","title":"hygger Submersible Water Pump, 530 GPH 20W with Flow Controller","description":"\u003cp\u003e\u003cstrong\u003eThe hygger Submersible Pump is a 20W water pump for aquariums, fountains, and other water features, delivering up to 530 GPH (2000 L\/H) with a maximum lift of 8.2 ft (2.5 m).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExternal controller with 10 flow levels and three operating modes — adjust the pump’s flow and operating setting.\u003c\/li\u003e\n\u003cli\u003eSix nozzle pieces across three sizes — choose from different outlet sizes for varied water flows and effects.\u003c\/li\u003e\n\u003cli\u003eFour rubber suction cups — hold the pump against the bottom of a fish tank.\u003c\/li\u003e\n\u003cli\u003eTool-free switch between bottom and side suction — select the intake position and remove the front cover for cleaning.\u003c\/li\u003e\n\u003cli\u003eDesigned for submersible or inline use — suit a range of aquarium, pond, fountain, and water-system setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen a water feature needs a pump that can be adjusted to suit its setup, the hygger offers controlled flow and multiple intake and outlet options. Its compact body measures 5.9 x 3.1 x 3.1 in (15 x 7.9 x 7.9 cm), making its dimensions useful to consider when planning where it will sit. The pump is intended for fish and turtle keeping as well as decorative and water-based applications.\u003c\/p\u003e\n\u003ch3\u003eHow can I adjust the flow and operating mode?\u003c\/h3\u003e\n\u003cp\u003eUse the external controller to choose among 10 flow levels and constant, wave, or feeding mode. This gives you options for setting how the pump operates in your aquarium or water feature. The pump is also suitable for fish and turtle raising, where adjustable operation can be useful for the setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 20 watts.\u003c\/li\u003e\n\u003cli\u003eInput voltage: 100–240V; output voltage: DC 24V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich nozzle sizes and mounting features are included?\u003c\/h3\u003e\n\u003cp\u003eThe pump comes with two nozzle pieces in each of three sizes, so you can choose between outlet sizes for different water flows and landscape effects. Four rubber suction cups are fitted to the base to attach the pump to the bottom of a fish tank.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNozzle sizes: 3\/4 in (19.05 mm), 7\/8 in (22.225 mm), and 1 in (25.4 mm).\u003c\/li\u003e\n\u003cli\u003eTwo pieces of each nozzle size are supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan I change the pump’s intake or clean it without tools?\u003c\/h3\u003e\n\u003cp\u003eYes. Swap the front cover without tools to switch between bottom-suction and side-suction configurations. The cover can also be removed for cleaning, making it easier to access the pump during routine upkeep.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCord length: 4.7 ft (1.43 m) + 8.2 ft (2.5 m).\u003c\/li\u003e\n\u003cli\u003eFor outdoor use, a residual-current protection socket or circuit breaker is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere can I use the hygger pump?\u003c\/h3\u003e\n\u003cp\u003eThe pump is suitable for aquariums, fountains, small ponds, water-spring artwork, garden statuary, patio drip-irrigation systems, aquaponics, and aquaculture. It can operate submerged or inline, so it accommodates more than one type of water installation. Its motor is designed for very low running noise, a consideration for setups where pump sound matters.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse it in fish and turtle setups as well as decorative water features.\u003c\/li\u003e\n\u003cli\u003eChoose submersible or inline operation to suit the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe hygger Submersible Pump suits aquarium and water-feature owners who want adjustable operation, several nozzle sizes, and a choice of intake positions. Its controller, interchangeable front cover, and submersible or inline use give it practical flexibility across the listed applications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What flow settings and modes does the hygger Submersible Pump offer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hygger Submersible Pump has an external controller with 10 flow levels and three modes: constant, wave, and feeding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which nozzle sizes come with the hygger Submersible Pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hygger Submersible Pump includes two nozzle pieces each in 3\/4 in, 7\/8 in, and 1 in sizes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"hygger","offers":[{"title":"Default Title","offer_id":55679590367575,"sku":"B0GYN3YGS2","price":62.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/hygger-submersible-pump-front-view.jpg?v=1793412440"},{"product_id":"useek-automatic-aquarium-top-off-system-0-7-inch-compact-design-with-qst-safety-monitor","title":"Useek Automatic Aquarium Top Off System, 0.7-Inch Compact Design with QST Safety Monitor","description":"\u003cp\u003e\u003cstrong\u003eUseek Auto Top Off System is an automatic aquarium water top-off kit designed to replace evaporated water, with a compact 0.7-inch (1.78 cm) diameter design.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSaltwater evaporation can raise salinity concentration — automatic top-off helps limit water-level and salinity fluctuations.\u003c\/li\u003e\n\u003cli\u003eFits rimmed or rimless aquariums and sumps — use it across these aquarium configurations.\u003c\/li\u003e\n\u003cli\u003eQST monitors refill time and gives a visual alert — the pump stops if filling takes six times longer than expected.\u003c\/li\u003e\n\u003cli\u003eThe kit includes what is needed for setup — integrate the system into an aquarium setup.\u003c\/li\u003e\n\u003cli\u003eA two-year product warranty and free replacement policy — added coverage for the system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAquariums regularly lose water through evaporation. In saltwater tanks, that loss can leave the water level lower while salinity concentration rises. Useek’s automatic top-off system is made to address that ongoing change, helping maintain a stable water level and environment for aquatic life. It is intended for saltwater and freshwater aquarium setups, including reef tanks, where managing evaporation is part of maintaining the aquarium.\u003c\/p\u003e\u003ch3\u003eHow does Useek help with aquarium evaporation?\u003c\/h3\u003e\u003cp\u003eUseek automatically maintains the aquarium water level as water evaporates. In a saltwater aquarium, keeping the level from dropping helps limit the related rise and fluctuation in salinity concentration. This automatic operation is designed to support a more stable environment for aquatic life, rather than relying on manual water-level adjustments.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMade for recurring water loss through aquarium evaporation.\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain water level and help limit salinity fluctuations in saltwater aquariums.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWill the Useek Auto Top Off System fit my tank or sump?\u003c\/h3\u003e\u003cp\u003eYes, the system is designed for rimmed and rimless aquariums as well as sumps. Its stated diameter is 0.7 inches (1.78 cm), giving it a compact profile for aquarium setups. Consider the available space at your intended installation point when choosing where to place it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with rimmed aquarium setups.\u003c\/li\u003e\n\u003cli\u003eAlso designed for rimless tanks and sumps.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow does QST protect the aquarium during refilling?\u003c\/h3\u003e\u003cp\u003eUseek’s QST feature calculates the expected refill time and monitors how long filling takes. If a refill lasts six times longer than expected, the system provides a visual alert and stops the pump. This timed response is designed to help protect against overfilling, dry running, and sensor malfunctions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUses expected fill time as the reference for monitoring.\u003c\/li\u003e\n\u003cli\u003eStops the pump when refill time reaches six times the expected duration.\u003c\/li\u003e\n\u003cli\u003eProvides a visual alert when that extended refill time is detected.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe kit includes what is needed for setup, and the system is covered by a two-year product warranty with a free replacement policy. Useek Auto Top Off System suits aquarium keepers who want automatic water-level maintenance in a saltwater or freshwater setup, including a rimmed or rimless tank or sump. Its compact diameter and timed pump protection make it a fit for buyers seeking an automatic top-off system with visual alerts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the Useek Auto Top Off System fit a rimless aquarium or sump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Useek Auto Top Off System is designed for rimmed and rimless aquariums and sumps, with a compact 0.7-inch (1.78 cm) diameter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How does the Useek Auto Top Off System respond to an unusually long refill?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Useek Auto Top Off System provides a visual alert and stops the pump if refill time reaches six times the expected duration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Useek","offers":[{"title":"Default Title","offer_id":55680251724119,"sku":"B0C5DZ769T","price":60.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/useek-auto-top-off-system-front-view.jpg?v=1793427242"},{"product_id":"jerepet-aquarium-water-pump-520-gph-20w-9ft-with-adjustable-flow-controller","title":"JEREPET Aquarium Water Pump, 520 GPH 20W 2.7 m with Adjustable Flow Controller","description":"\u003cp\u003eJEREPET is a 20 W DC 24 V aquarium return pump designed to circulate water in freshwater and marine setups, with a maximum flow of 520 GPH (approximately 1,968 L\/h) and six adjustable speeds.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e520 GPH maximum flow with the largest nozzle at 0 ft lift (0 m) — gives you the pump’s rated flow conditions.\u003c\/li\u003e\n\u003cli\u003eMaximum lift of 10 ft (3.05 m) — supports water return to an elevated aquarium or feature.\u003c\/li\u003e\n\u003cli\u003eSix flow settings from 30% to 100% — lets you adjust circulation using the controller.\u003c\/li\u003e\n\u003cli\u003eSealed impeller and ceramic shaft, with noise below 30 dBA — supports quiet pump operation.\u003c\/li\u003e\n\u003cli\u003eAutomatic shutoff for dry running or blockage — stops the pump when either condition occurs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis pump is made for aquarium circulation and water return, including nano reef setups, sumps, fountains, ponds, hydroponic systems and waterfalls. Its submersible or external\/inline installation options let it serve different water-system layouts, while the controller adds flow adjustment and feeding and wave-maker modes.\u003c\/p\u003e\n\u003ch3\u003eWhat systems can the JEREPET pump be used with?\u003c\/h3\u003e\n\u003cp\u003eJEREPET works with freshwater and saltwater systems, including aquarium sumps, nano reef tanks, fountains, ponds, hydroponic setups and waterfalls. It can be installed submerged in water or used externally as an inline pump, making it suitable for more than aquarium return circulation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplications include aquariums, fountains, sumps, hydroponics, ponds and waterfalls.\u003c\/li\u003e\n\u003cli\u003eDesigned for both freshwater and marine water use.\u003c\/li\u003e\n\u003cli\u003eCan be used as a submersible or external\/inline pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow do the controller and flow settings work?\u003c\/h3\u003e\n\u003cp\u003eThe included controller provides six speed settings that adjust flow from 30% to 100% of maximum flow. It also has a 10-minute feeding mode and a wave-maker function, giving you options for routine aquarium operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChoose among six adjustable speed levels.\u003c\/li\u003e\n\u003cli\u003eUse the 10-minute feeding mode during feeding.\u003c\/li\u003e\n\u003cli\u003eSelect the wave-maker function for water movement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat size and lift should I allow for?\u003c\/h3\u003e\n\u003cp\u003eThe pump measures 5.4 x 2.6 x 3.4 inches (13.7 x 6.6 x 8.6 cm), and its maximum lift is 10 ft (3.05 m). The 520 GPH maximum flow applies with the largest nozzle at 0 ft lift, so flow is specified at that condition rather than at maximum lift. The product title includes “9FT,” while the pump specification gives a 10 ft maximum lift.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 20 W, DC 24 V.\u003c\/li\u003e\n\u003cli\u003eNoise level: below 30 dBA.\u003c\/li\u003e\n\u003cli\u003eAutomatic shutoff activates if the pump runs dry or becomes blocked.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eJEREPET suits aquarium keepers and water-feature users who need adjustable circulation for freshwater or marine systems, including nano reefs, and value the option of submerged or inline installation. Its defined flow settings, controller modes and automatic shutoff make it a practical fit for pump setups that need controllable water return.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the JEREPET aquarium pump be used in saltwater and freshwater?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The JEREPET aquarium pump is designed for freshwater and marine water use, including nano reef tanks, sumps, fountains, ponds, hydroponics and waterfalls.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the JEREPET aquarium pump run submerged or inline?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The JEREPET aquarium pump can be installed as a submersible pump or used externally as an inline pump.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JEREPET","offers":[{"title":"Default Title","offer_id":55680289800535,"sku":"B09V6RHXNL","price":88.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/jerepet-aquarium-pump-front-view.jpg?v=1793428693"},{"product_id":"hygger-aquarium-wave-maker-for-5-10-gallon-tanks-660-gph-adjustable-flow","title":"hygger Aquarium Wave Maker for 18.9–37.9 L Tanks, 660 GPH Adjustable Flow","description":"\u003cp\u003e\u003cstrong\u003eThe hygger Aquarium Wave Maker is an adjustable circulation pump for 5–10 gallon (19–38 L) aquariums, with three wave modes and a maximum flow rate of 660 GPH (2,498 L\/h).\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThree interchangeable outlets — choose a water-flow width for different aquarium setups.\u003c\/li\u003e\n\u003cli\u003eThree wave modes and six flow settings — adjust circulation for your tank and aquatic life.\u003c\/li\u003e\n\u003cli\u003e10-minute feeding mode — pause the pump while feeding to help avoid splashing.\u003c\/li\u003e\n\u003cli\u003ePower-off memory — the pump returns to your previous settings when power is restored.\u003c\/li\u003e\n\u003cli\u003eMagnetic base for glass up to 3\/8 in (9.5 mm) thick — mount the pump inside a compatible tank.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesigned for small freshwater and saltwater aquariums, this compact wave maker moves water to create current, support aeration, and agitate sediment for filtration. Its adjustable flow gives you options for different aquatic life and for changing circulation between daytime and nighttime.\u003c\/p\u003e\u003ch3\u003eHow can I adjust the current for my aquarium?\u003c\/h3\u003e\u003cp\u003eChoose among constant, wave, and pulse modes, then set one of six flow levels: 10%, 20%, 40%, 60%, 80%, or 100%. Three interchangeable outlets provide different flow widths, letting you tailor the current to your aquarium setup. The DC powerhead uses a smoother pendulum-like current than traditional square-wave technology.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePress the Mode button to switch between the three wave modes.\u003c\/li\u003e\n\u003cli\u003eSelect the flow level that suits the tank size and the aquatic life you keep.\u003c\/li\u003e\n\u003cli\u003eRun higher flow during the day and lower flow at night if that suits your setup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat happens during feeding and after a power interruption?\u003c\/h3\u003e\u003cp\u003eHold the FD button until all five indicator lights illuminate to activate the 10-minute feeding mode; the pump pauses, then automatically resumes wave mode when the lights go out. After a power interruption, its memory function restores your previous settings without requiring a reset.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe pause is intended to support feeding with less splashing.\u003c\/li\u003e\n\u003cli\u003eAutomatic return to your prior settings keeps your selected operation in place after power is restored.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWill the hygger wave maker fit my tank?\u003c\/h3\u003e\u003cp\u003eThe pump is suitable for 5–10 gallon aquariums and measures 1.57 × 1.97 in (4 × 5 cm), so compare the magnetic mount’s glass-thickness limit with your tank before installation. It is suitable for both freshwater and saltwater use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower: 9 W; maximum flow: 660 GPH (2,498 L\/h).\u003c\/li\u003e\n\u003cli\u003eInput voltage: 100–240 V; output voltage: DC 24 V.\u003c\/li\u003e\n\u003cli\u003eGood to know: the magnetic base is recommended for glass no thicker than 3\/8 in (9.5 mm).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWith adjustable circulation, feeding pause, and power-off memory, this hygger wave maker suits aquarium keepers who want to manage water movement in a 5–10 gallon freshwater or saltwater tank. Its compact 1.57 × 1.97 in (4 × 5 cm) pump and magnetic base are designed for tanks within the stated glass-thickness limit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size aquarium is the hygger Aquarium Wave Maker designed for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hygger Aquarium Wave Maker is suitable for 5–10 gallon aquariums and works in both freshwater and saltwater tanks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I adjust the flow on the hygger Aquarium Wave Maker?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hygger Aquarium Wave Maker offers constant, wave, and pulse modes, six flow levels from 10% to 100%, and three interchangeable outlets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"hygger","offers":[{"title":"Default Title","offer_id":55680296616279,"sku":"B0FDWHCWTQ","price":67.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/hygger-aquarium-wave-maker-front-view.jpg?v=1793428963"},{"product_id":"ioaoi-nano-aquarium-sump-return-pump-185gph-dc-12v-with-adjustable-flow-controller","title":"IOAOI Nano Aquarium Sump Return Pump, 185GPH DC 12V with Adjustable Flow Controller","description":"\u003cp\u003eIOAOI Nano Return Pump is a DC 12V aquarium sump return pump that moves up to 700L\/H (185GPH) while using 9 watts of power.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e700L\/H (185GPH) flow at 9 watts — supports water return with low power consumption.\u003c\/li\u003e\n\u003cli\u003eDC 12V bottom-suction design — draws water from a low level in the sump.\u003c\/li\u003e\n\u003cli\u003eThree controller modes — choose constant flow, wave making or feeding mode.\u003c\/li\u003e\n\u003cli\u003eAdjustable flow across gears 1 to 10 — select the pump output that suits your setup.\u003c\/li\u003e\n\u003cli\u003eOperating noise below 28 dB — water flow is the audible sound.\u003c\/li\u003e\n\u003cli\u003eNo metal parts, with a ceramic shaft containing graphite — designed for freshwater or saltwater use without rust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA sump return pump helps move water back toward the aquarium, and the IOAOI Nano is made for that role in indoor aquarium systems. Its adjustable controller provides a choice of flow modes and levels, while low-water-level operation and dry-burning protection support use as the sump water level changes. The compact pump body and two included nozzle sizes offer options for connecting the return flow.\u003c\/p\u003e\n\u003ch3\u003eHow can I adjust the pump’s flow?\u003c\/h3\u003e\n\u003cp\u003eUse the controller to select constant flow, wave-making or feeding mode, then adjust the output using gears 1 through 10. This gives you multiple settings for changing water movement without replacing the pump. Its rated output is 700L\/H (185GPH), with power consumption of 9 watts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eController provides three operating modes.\u003c\/li\u003e\n\u003cli\u003eFlow adjustment spans gears 1 to 10.\u003c\/li\u003e\n\u003cli\u003eDC 12V operation is the product’s stated safety feature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat size pump and connections does it have?\u003c\/h3\u003e\n\u003cp\u003eThe pump measures 2.1 × 2.1 × 4.5 inches (5.3 × 5.3 × 11.4 cm) and comes with two nozzles: 0.6 inches (1.5 cm) and 0.45 inches (1.1 cm). Compare these dimensions with the available space in your sump and the connection you intend to use. A 9-foot (2.74 m) power cord provides the connection to a power source, and the pump is for indoor use only.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo nozzle sizes are included: 0.6-inch and 0.45-inch.\u003c\/li\u003e\n\u003cli\u003eLow-water operation and dry-burning protection are built into the pump.\u003c\/li\u003e\n\u003cli\u003eIndoor use only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan this return pump be used in saltwater?\u003c\/h3\u003e\n\u003cp\u003eYes. The IOAOI Nano Return Pump is designed for both saltwater and freshwater aquariums. Its construction has no metal parts and uses a ceramic shaft with graphite added inside; the product is specified as rust-free. The pump is intended for aquarium use indoors, with the bottom-suction intake supporting operation at low water levels.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for freshwater or saltwater.\u003c\/li\u003e\n\u003cli\u003eBottom suction draws water from a low level.\u003c\/li\u003e\n\u003cli\u003eBelow-28 dB operating noise, with water flow as the audible sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis pump suits aquarium keepers who need a controllable return pump for an indoor sump, including saltwater setups, and want selectable flow modes plus low-water operation. Its 12V, 9-watt design, adjustable controller and two nozzle options define its fit for that use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the IOAOI Nano Return Pump be used in saltwater aquariums?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The IOAOI Nano Return Pump is designed for freshwater or saltwater aquariums and has no metal parts, with a ceramic shaft containing graphite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What nozzles come with the IOAOI Nano Return Pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The IOAOI Nano Return Pump includes two nozzles, measuring 0.6 inches (1.5 cm) and 0.45 inches (1.1 cm).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IOAOI","offers":[{"title":"Default Title","offer_id":55680344064343,"sku":"B0CWGXW696","price":72.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/ioaoi-nano-return-pump-front-view.jpg?v=1793430183"},{"product_id":"magtool-aquarium-auto-top-off-system-green-dual-optical-sensors","title":"MagTool Aquarium Auto Top Off System, Green, Dual Optical Sensors","description":"\u003cp\u003e\u003cstrong\u003eMagTool ATO is an automatic aquarium top-off system designed to refill evaporated water and help maintain a stable water level, using dual optical sensors to control filling.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow-level sensor starts refilling and high-level sensor stops it — helps maintain the set water level as evaporation occurs.\u003c\/li\u003e\n\u003cli\u003eCompact sensor measures 0.7 inches (about 2 cm) — takes up little space in the aquarium.\u003c\/li\u003e\n\u003cli\u003eDesigned for reef, saltwater, freshwater, and planted aquariums — supports different aquarium setups, including open-top tanks.\u003c\/li\u003e\n\u003cli\u003eDual sensors and an intelligent filling-time safety program — stops operation when needed to help prevent overfilling.\u003c\/li\u003e\n\u003cli\u003eComplete kit with a 12V DC pump, adapter, anti-siphon check valve, tube, bracket, controller, and manual — includes the parts needed for daily operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEvaporation can lower aquarium water levels during everyday use, particularly in open-top setups where water may evaporate faster. MagTool ATO is made to handle routine top-offs automatically, so maintaining the water level does not depend on adding water by hand each day. Its sensor-based operation is also useful when you are away for a short period and want the system to manage daily top-offs.\u003c\/p\u003e\n\u003ch3\u003eHow does MagTool ATO control the water level?\u003c\/h3\u003e\n\u003cp\u003eMagTool ATO uses two optical sensors to manage the refill cycle: the lower sensor detects a drop in water level and starts the pump, while the upper sensor detects the target level and stops filling. This automatic start-and-stop process is designed to keep the water level more stable as evaporation takes place. A separate intelligent safety program monitors filling time and stops operation when needed, providing an additional safeguard against overfilling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe lower optical sensor triggers a refill when the water level falls.\u003c\/li\u003e\n\u003cli\u003eThe upper optical sensor signals the system to stop filling at the correct level.\u003c\/li\u003e\n\u003cli\u003eThe safety program monitors the duration of filling and can stop the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich aquariums is this top-off system designed for?\u003c\/h3\u003e\n\u003cp\u003eMagTool ATO is suitable for reef, saltwater, freshwater, and planted aquariums. It is also intended for open-top aquariums, where faster evaporation can make regular water additions more frequent. The compact sensor measures 0.7 inches (about 2 cm), helping it take up minimal space within the aquarium setup.\u003c\/p\u003e\n\u003cp\u003eFor aquarium keepers, maintaining a steadier water level can reduce the need to add water manually as part of daily care. The system is designed for routine top-off rather than a one-time fill: the sensors detect changing water levels and control the refill cycle. MagTool provides a 1-year warranty for the ATO system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for reef, saltwater, freshwater, and planted aquarium setups.\u003c\/li\u003e\n\u003cli\u003eDesigned to help manage evaporation in open-top aquariums.\u003c\/li\u003e\n\u003cli\u003eSensor size: 0.7 inches (about 2 cm).\u003c\/li\u003e\n\u003cli\u003eManufacturer warranty: 1 year.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat comes in the MagTool ATO kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains a 12V DC water pump measuring 1.5 × 1.5 × 2.0 inches (3.8 × 3.8 × 5.1 cm), with a 74 GPH flow rate (280 L\/h) and an 8.2 ft maximum head height (2.5 m). It also includes a power adapter, anti-siphon check valve, 1.5 m water tube (4.9 ft), mounting bracket, controller, and user manual. The listed kit contents are intended to provide the parts needed for daily operation without purchasing additional parts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e12V DC pump with 74 GPH flow rate (280 L\/h).\u003c\/li\u003e\n\u003cli\u003eMaximum pump head height: 8.2 ft (2.5 m).\u003c\/li\u003e\n\u003cli\u003e1.5 m water tube (4.9 ft), power adapter, anti-siphon check valve, and mounting bracket.\u003c\/li\u003e\n\u003cli\u003eController and user manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan MagTool ATO manage top-offs while you are away?\u003c\/h3\u003e\n\u003cp\u003eMagTool ATO automatically handles daily top-offs, so it can manage routine water-level changes during a short absence. The dual-sensor refill cycle starts when the water level drops and stops when the correct level is reached; the filling-time safety program can also stop operation when needed. It is designed to reduce the need to ask someone to check and top off the aquarium during a short trip or business absence.\u003c\/p\u003e\n\u003cp\u003eMagTool ATO is suited to aquarium keepers who want automatic daily top-offs across reef, saltwater, freshwater, or planted setups, especially open-top aquariums with faster evaporation. Its dual optical sensors control refilling, and its kit includes the pump and listed operating components for daily use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which aquarium types is MagTool ATO designed for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: MagTool ATO is designed for reef, saltwater, freshwater, and planted aquariums, including open-top setups where evaporation may be faster.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pump is included with MagTool ATO?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: MagTool ATO includes a 12V DC water pump with a 74 GPH flow rate (280 L\/h) and an 8.2 ft maximum head height (2.5 m).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MagTool","offers":[{"title":"Default Title","offer_id":55680451281239,"sku":"B0DS23RMVP","price":60.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/magtool-ato-system-kit-front.jpg?v=1793432114"},{"product_id":"useek-auto-top-off-system-for-aquariums-0-7-inch-sensor-with-refill-protection","title":"Useek Auto Top Off System for Aquariums, 0.7-Inch Sensor with Refill Protection","description":"\u003cp\u003e\u003cstrong\u003eUseek Auto Top Off System automatically replaces evaporated aquarium water to help maintain a stable water level and, in saltwater tanks, steady salinity; its compact sensor measures 0.7 inches (1.78 cm) in diameter.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic water-level top-off — helps limit water-level and salinity fluctuations as aquarium water evaporates.\u003c\/li\u003e\n\u003cli\u003e0.7-inch (1.78 cm) diameter nano-size design — fits unobtrusively in rimmed or rimless tanks and sumps.\u003c\/li\u003e\n\u003cli\u003eQST refill-time monitoring — visual alerts and pump shutoff respond to a refill lasting six times longer than expected.\u003c\/li\u003e\n\u003cli\u003eRimmed and rimless aquarium compatibility — supports integration with different aquarium setups.\u003c\/li\u003e\n\u003cli\u003eSetup kit included — provides the items needed to set up the system.\u003c\/li\u003e\n\u003cli\u003eTwo-year product warranty and free replacement policy — adds warranty coverage for the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEvaporation lowers aquarium water levels, and in saltwater aquariums it can also increase salinity concentration. Useek’s automatic top-off system is made to manage that routine change for saltwater and freshwater aquariums, helping keep the water level more consistent without relying on manual top-offs alone. Its compact format is intended for aquariums where equipment needs to fit at the tank or sump.\u003c\/p\u003e\n\u003ch3\u003eWhat does the Useek Auto Top Off System do?\u003c\/h3\u003e\n\u003cp\u003eIt automatically tops off aquarium water as evaporation lowers the level. In a saltwater aquarium, maintaining the water level helps prevent the salinity concentration from rising as water evaporates, supporting a more stable environment for aquatic life. The system is also suitable for freshwater aquariums, where it manages water lost through evaporation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for both saltwater and freshwater aquarium use.\u003c\/li\u003e\n\u003cli\u003eAutomatically maintains aquarium water level as evaporation occurs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my aquarium or sump?\u003c\/h3\u003e\n\u003cp\u003eThe Useek system is designed for rimmed and rimless aquariums and can also fit in a sump. Its nano-size design measures 0.7 inches (1.78 cm) in diameter, making the sensing component unobtrusive in the setup. Compare this diameter with the available space where you plan to position it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with rimmed aquarium setups.\u003c\/li\u003e\n\u003cli\u003eCompatible with rimless aquariums and sumps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow does the refill protection work?\u003c\/h3\u003e\n\u003cp\u003eUseek’s QST monitoring calculates an ideal refill time and provides a visual alert while stopping the pump if a refill takes six times longer than expected. This response is designed to help protect against overfilling, dry running, and sensor malfunctions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMonitors refill duration against the expected fill time.\u003c\/li\u003e\n\u003cli\u003eStops the pump and gives a visual alert when the stated time threshold is reached.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat comes with the system?\u003c\/h3\u003e\n\u003cp\u003eThe Useek Auto Top Off System kit includes everything needed for setup. It is intended to make integrating an automatic top-off system into a compatible rimmed or rimless aquarium straightforward. The product also comes with a two-year warranty and a free replacement policy.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSetup kit included.\u003c\/li\u003e\n\u003cli\u003eTwo-year product warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUseek Auto Top Off System suits aquarium keepers who want automatic evaporation top-off for a saltwater or freshwater tank, including setups with a rimmed or rimless aquarium or sump. It is designed to maintain water level and help limit evaporation-related salinity changes in saltwater aquariums, with refill-time monitoring and pump shutoff built in.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which aquariums is the Useek Auto Top Off System compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Useek Auto Top Off System is designed for saltwater or freshwater aquariums, including rimmed and rimless tanks and sumps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How does the Useek Auto Top Off System help prevent overfilling?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Useek Auto Top Off System monitors refill time, gives a visual alert, and stops the pump if filling lasts six times longer than expected.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Useek","offers":[{"title":"Default Title","offer_id":55680453738839,"sku":"B0CFVWDKMC","price":60.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/useek-auto-top-off-system-kit-front.jpg?v=1793432170"},{"product_id":"stazko-replacement-submersible-pump-for-yuanhua-yh-lv170t-models-with-transformer","title":"STAZKO Replacement Submersible Pump for Yuanhua YH-LV170T Models with Transformer","description":"\u003cp\u003eSTAZKO is a replacement submersible pump for the Yuanhua YH-LV170T and YH-LV170T~W~2 Light Ext. models, supplied with a transformer for replacing the pump while reusing your existing light.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor Yuanhua YH-LV170T and YH-LV170T~W~2 Light Ext. models — match the replacement to one of these model names.\u003c\/li\u003e\n\u003cli\u003eSubmersible pump replacement — intended to replace the pump in the compatible setup.\u003c\/li\u003e\n\u003cli\u003eTransformer included — the replacement comes with a transformer.\u003c\/li\u003e\n\u003cli\u003eLights are not included — reuse your existing light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis replacement is for a setup that uses one of the specified Yuanhua Light Ext. models and needs a pump replacement. The key choice is model match: the listed compatibility is limited to YH-LV170T and YH-LV170T~W~2. The pump is supplied with a transformer, while the light remains the part you reuse from your existing setup.\u003c\/p\u003e\n\u003ch3\u003eWhich Yuanhua models does this pump replace?\u003c\/h3\u003e\n\u003cp\u003eIt is a replacement for the Yuanhua YH-LV170T and YH-LV170T~W~2 Light Ext. models. Compare the model name of your existing setup with these exact model designations when choosing this part.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible model: Yuanhua YH-LV170T.\u003c\/li\u003e\n\u003cli\u003eCompatible model: Yuanhua YH-LV170T~W~2 Light Ext.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat comes with the replacement pump?\u003c\/h3\u003e\n\u003cp\u003eThe replacement includes a transformer. The light is not part of the replacement, so this option is for a setup where you will reuse your existing light.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded: submersible pump and transformer.\u003c\/li\u003e\n\u003cli\u003eReuse: the light from your existing setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs the light included?\u003c\/h3\u003e\n\u003cp\u003eNo. STAZKO supplies the replacement pump with a transformer, but not a light; plan to reuse your existing light.\u003c\/p\u003e\n\u003cp\u003eThis replacement suits owners of the specified Yuanhua models who need a submersible pump and can reuse their existing light. Its model-specific compatibility, included transformer, and reuse-the-light requirement define what it is intended to replace.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which models is the STAZKO submersible pump replacement for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The STAZKO submersible pump is a replacement for Yuanhua YH-LV170T and YH-LV170T~W~2 Light Ext. models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the STAZKO submersible pump include a light?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The STAZKO submersible pump comes with a transformer, but you must reuse your existing light.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"STAZKO","offers":[{"title":"Default Title","offer_id":55680458555735,"sku":"B0G1RYFT9Y","price":84.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/stazko-submersible-pump-front-view.jpg?v=1793432373"},{"product_id":"fzone-aquarium-auto-top-off-system-green-with-dual-optical-sensors","title":"FZONE Aquarium Auto Top Off System, Green, with Dual Optical Sensors","description":"\u003cp\u003e\u003cstrong\u003eFZONE ATO System is an automatic aquarium top-off system designed to maintain water level, with dual optical sensors and a compact 0.7-inch (1.78 cm) profile.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEFTT calculates the expected refill time for your aquarium — giving the system a fill-time reference.\u003c\/li\u003e\n\u003cli\u003eAFT monitors water level before activating the pump — helping avoid unnecessary pumping.\u003c\/li\u003e\n\u003cli\u003eQST 2.0 provides visual alerts and stops the pump if a refill takes too long — adding safeguards during operation.\u003c\/li\u003e\n\u003cli\u003eMagnetic mounts support aquarium walls up to 0.78 inches (20 mm) thick — allowing attachment to compatible tanks.\u003c\/li\u003e\n\u003cli\u003eThe 74-gallon-per-hour pump lifts water up to 2 meters, and a check valve helps prevent backflow — supporting water delivery to the aquarium.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKeeping an aquarium topped off calls for ongoing attention to its water level. FZONE’s automatic top-off system is designed to monitor that level and replenish water as needed, including in saltwater aquariums. Its compact form suits installations where space is limited, while the sensor and controller technologies manage when the pump runs and how refilling is monitored.\u003c\/p\u003e\n\u003ch3\u003eHow precisely does the FZONE ATO System monitor water level?\u003c\/h3\u003e\n\u003cp\u003eTwo optical sensors with precision under 1 mm monitor the aquarium water level in real time. The system is designed to keep water-level fluctuation below 0.6 centimeters, providing a consistent reference for automatic top-off operation. The compact 0.7-inch profile helps the unit fit in a confined installation space.\u003c\/p\u003e\n\u003cp\u003eThe optical sensors give the controller information about the current level, while the included technologies govern pump activation and refill monitoring. This design is intended for aquarists who want an automatic system to manage routine top-offs rather than relying on manual level checks alone.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual optical sensing, rather than a single optical sensor.\u003c\/li\u003e\n\u003cli\u003eReal-time water-level monitoring.\u003c\/li\u003e\n\u003cli\u003eSuitable for saltwater aquarium top-off use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow do EFTT, AFT, and QST 2.0 work?\u003c\/h3\u003e\n\u003cp\u003eEFTT learns how long your aquarium takes to refill to its target level, AFT measures water level to limit unnecessary pump activation, and QST 2.0 monitors refill safety. Together, these technologies coordinate fill timing, level measurement, and pump protection.\u003c\/p\u003e\n\u003cp\u003eQST 2.0 gives a visual alert and stops the pump immediately if a refill lasts more than six times the duration calculated by EFTT. It can also detect a sensor or controller malfunction, as well as an empty reservoir. The pump is protected from running dry, and the prolonged-fill cutoff helps guard against overfilling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEFTT establishes the refill-time reference used by the safety monitoring.\u003c\/li\u003e\n\u003cli\u003eQST 2.0 can identify sensor and controller faults.\u003c\/li\u003e\n\u003cli\u003eAn empty reservoir is among the conditions the system can detect.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill the FZONE ATO System fit my aquarium or sump?\u003c\/h3\u003e\n\u003cp\u003eThe system is designed for rimmed and rimless aquariums, as well as sumps, and its magnets support walls up to 0.78 inches (20 mm) thick. Measure the mounting wall before installation to confirm it falls within that limit. Its small profile is intended for compact spaces.\u003c\/p\u003e\n\u003cp\u003eThe magnetic attachment provides a way to position the sensors on compatible aquarium walls. The package includes all accessories, so the system components needed for installation are supplied together. No aquarium shape beyond the stated rimmed and rimless compatibility is required for this fit guidance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with rimmed aquariums, rimless aquariums, and sumps.\u003c\/li\u003e\n\u003cli\u003eMaximum supported aquarium wall thickness: 0.78 inches (20 mm).\u003c\/li\u003e\n\u003cli\u003eAll accessories are included in the package.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat are the pump capacity and backflow safeguards?\u003c\/h3\u003e\n\u003cp\u003eThe included pump moves water at 74 gallons per hour and can lift it up to 2 meters. A check valve helps prevent water from flowing backward and draining the main display aquarium.\u003c\/p\u003e\n\u003cp\u003eThe pump delivers top-off water from the reservoir, while the check valve addresses backflow in the water line. The refill-time monitoring and pump controls work alongside these water-delivery components; QST 2.0 can stop the pump when it detects a prolonged refill or another monitored fault.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump flow rate: 74 gallons per hour.\u003c\/li\u003e\n\u003cli\u003eMaximum stated lift: 2 meters.\u003c\/li\u003e\n\u003cli\u003eCheck valve helps prevent backflow from draining the display aquarium.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe FZONE ATO System suits aquarists who want automatic water-level monitoring for a rimmed or rimless aquarium or sump, including saltwater setups. Its compact profile, optical sensors, refill controls, and included accessories bring the monitoring and top-off components into one system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What aquarium setups does the FZONE ATO System fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The FZONE ATO System is designed for rimmed and rimless aquariums and sumps, with magnetic mounts supporting aquarium walls up to 0.78 inches (20 mm) thick.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What safeguards does the FZONE ATO System provide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The FZONE ATO System’s QST 2.0 gives a visual alert and stops the pump if refilling takes more than six times the EFTT-calculated duration; it can also detect an empty reservoir or sensor or controller malfunction.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FZONE","offers":[{"title":"Default Title","offer_id":55680489423191,"sku":"B09YVP3L22","price":60.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/fzone-ato-system-front-view.jpg?v=1793432833"},{"product_id":"jerepet-aquarium-water-pump-1850-gph-24v-dc-55w-with-controller","title":"JEREPET Aquarium Water Pump, 1850 GPH 24V DC, 55W with Controller","description":"\u003cp\u003e\u003cstrong\u003eJEREPET is a controllable aquarium return pump for circulating water in tanks and other water systems, with a maximum flow of 1850 GPH (7,003 L\/h) and 55W DC24V power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSix adjustable speeds covering 30%–100% of maximum flow — tailor water movement to your setup.\u003c\/li\u003e\n\u003cli\u003eMaximum lift of 14.8 ft (4.51 m) — move water to a higher return point.\u003c\/li\u003e\n\u003cli\u003e10-minute feeding mode and wave maker function — choose a mode for different aquarium routines.\u003c\/li\u003e\n\u003cli\u003eSealed impeller and ceramic shaft, with noise below 30 dBA — support quiet pump operation.\u003c\/li\u003e\n\u003cli\u003eAutomatic shutoff if the pump runs dry or becomes blocked — stop operation in either condition.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eChoose a pump that can handle more than one kind of water-circulation setup. JEREPET is designed for freshwater and marine aquariums as well as ponds, fountains, sumps, hydroponic systems, and waterfalls. Its adjustable flow and multiple placement options make it useful for setups that need a return pump or water movement in a different system.\u003c\/p\u003e\n\u003ch3\u003eWhich aquariums and water systems can this pump serve?\u003c\/h3\u003e\n\u003cp\u003eJEREPET can be used with freshwater or saltwater and across aquarium and other water-system applications. It supports submersible use or an external inline arrangement, so it can suit different installation layouts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse cases include fish tanks, aquariums, sumps, ponds, fountains, hydroponics, and waterfalls.\u003c\/li\u003e\n\u003cli\u003ePump dimensions are 7.5 × 3.5 × 4.8 in (19.05 × 8.89 × 12.19 cm), listed as length × width × height.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow do the flow settings and modes work?\u003c\/h3\u003e\n\u003cp\u003eThe controller provides six speed settings that adjust flow from 30% to 100% of maximum. It also offers a 10-minute feeding mode and a wave maker function, giving you control options for different aquarium needs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow rate: 1850 GPH (7,003 L\/h).\u003c\/li\u003e\n\u003cli\u003eMaximum lift: 14.8 ft (4.51 m).\u003c\/li\u003e\n\u003cli\u003ePower: 55W DC24V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat helps protect the pump and reduce operating noise?\u003c\/h3\u003e\n\u003cp\u003eThe pump automatically shuts off if it runs dry or becomes blocked. Its sealed impeller and ceramic shaft are used for efficient, quiet operation, with the noise level below 30 dBA.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDry-run shutoff responds when the pump operates without water.\u003c\/li\u003e\n\u003cli\u003eBlockage shutoff responds if the pump becomes obstructed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eJEREPET is suited to aquarium keepers and water-system users who need an adjustable return pump for freshwater or marine applications, with submersible or inline placement options. Its six flow settings, 14.8 ft maximum lift, and listed system uses make it a fit for varied circulation setups.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the JEREPET aquarium pump be used in freshwater and saltwater?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The JEREPET aquarium pump is suitable for freshwater and marine water, and can be used in aquariums, sumps, ponds, fountains, hydroponics, and waterfalls.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How can I adjust the JEREPET aquarium pump’s flow?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The JEREPET aquarium pump has six controller speed settings, adjusting flow from 30% to 100% of maximum, plus a 10-minute feeding mode and a wave maker function.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JEREPET","offers":[{"title":"Default Title","offer_id":55681168802135,"sku":"B08P2ZNL3T","price":118.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/jerepet-aquarium-pump-front-view_9a020480-e1fa-4558-9f6f-fd9690484deb.jpg?v=1793441857"},{"product_id":"hygger-aquarium-wave-maker-18w-135-gallon-cross-flow-pump-with-led-controller","title":"hygger Aquarium Wave Maker 18W, 511 L Cross-Flow Pump with LED Controller","description":"\u003cp\u003e\u003cstrong\u003eThe hygger Aquarium Wave Maker is an adjustable cross-flow pump for freshwater and marine reef aquariums, combining an 18W maximum power rating with a maximum flow rate of 1850 GPH (7,003 L\/h).\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e360-degree cross-flow waves — circulates water across the tank to help reduce dead spots.\u003c\/li\u003e\n\u003cli\u003eLED display controller with five wave modes — lets you adjust water movement and choose additional operating modes.\u003c\/li\u003e\n\u003cli\u003eUpper, middle, or lower tank placement — creates different wave patterns, bubbles, or bottom-level debris movement.\u003c\/li\u003e\n\u003cli\u003eFor aquariums up to 135 gallons (511 L) — sized for freshwater and marine reef tanks within that capacity.\u003c\/li\u003e\n\u003cli\u003eMagnetic base for glass up to 1\/2 inch (1.27 cm) thick — helps position the pump in the tank.\u003c\/li\u003e\n\u003cli\u003e8.5 inches (21.6 cm) long and 2 inches (5.1 cm) in diameter — gives you the pump's dimensions for planning placement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStill water can leave parts of an aquarium with limited circulation. This wavemaker is designed to move water throughout the tank in a pattern inspired by ocean flow, with placement and controller settings that let you shape its effect for your aquarium.\u003c\/p\u003e\u003ch3\u003eHow does the cross-flow pump move aquarium water?\u003c\/h3\u003e\u003cp\u003eIts cross-flow design spreads soft waves through 360 degrees, helping activate water across the aquarium rather than directing movement in just one path. This circulation is designed to eliminate dead spots and create a fish-gathering pattern. The pump's head rotates, so you can direct waves from multiple angles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCross-flow movement spreads water around the tank.\u003c\/li\u003e\n\u003cli\u003eA rotatable head changes the direction of the waves.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat settings can I control with the LED display?\u003c\/h3\u003e\u003cp\u003eThe controller offers five wave modes: pulse wave, sine wave, constant wave, random wave, and cross-flow wave. Flow-rate and frequency settings each range from 30 to 100, giving you adjustable controls for the pump's movement pattern. Feeding, night, and linkage modes are also available.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChoose from five named wave patterns.\u003c\/li\u003e\n\u003cli\u003eAdjust both flow rate and frequency from level 30 to 100.\u003c\/li\u003e\n\u003cli\u003eSelect feeding, night, or linkage mode on the controller.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow does pump placement change the water pattern?\u003c\/h3\u003e\u003cp\u003ePositioning the pump on the upper side of the aquarium produces visible wave shapes. At the middle of the tank, it creates a continuous stream of small bubbles to simulate an ocean effect. Near the bottom, the flow can move debris and accumulated water.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUpper placement: different visible wave shapes.\u003c\/li\u003e\n\u003cli\u003eMiddle placement: a continuous stream of small bubbles.\u003c\/li\u003e\n\u003cli\u003eBottom placement: moves debris and accumulated water.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat aquarium size and mounting thickness does it fit?\u003c\/h3\u003e\u003cp\u003eThe pump is suitable for freshwater and marine aquariums up to 135 gallons, and its magnetic base fits tank thicknesses up to 1\/2 inch. It uses 24V DC power and has a maximum power rating of 18W. Its maximum flow rate is 1850 GPH; the actual water pattern also depends on where you position the pump and which settings you select.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaximum aquarium capacity: 135 gallons.\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 1850 GPH.\u003c\/li\u003e\n\u003cli\u003eMaximum tank thickness for the magnetic base: 1\/2 inch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe hygger Aquarium Wave Maker suits aquarium keepers looking to adjust circulation and create different water patterns in freshwater or marine reef tanks within its capacity. Its cross-flow movement, adjustable controller, and magnetic mounting base bring those functions together in one 18W pump.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What aquarium size is the hygger Aquarium Wave Maker suitable for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hygger Aquarium Wave Maker is suitable for freshwater and marine reef aquariums up to 135 gallons, with a maximum flow rate of 1850 GPH.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wave settings does the hygger Aquarium Wave Maker offer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hygger Aquarium Wave Maker has pulse, sine, constant, random, and cross-flow wave modes, plus adjustable flow-rate and frequency levels from 30 to 100.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"hygger","offers":[{"title":"Default Title","offer_id":55681172963671,"sku":"B0C33GVBGY","price":106.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/hygger-aquarium-wave-maker-front-view_0f4ba5a9-804e-4d7d-8038-838de79152cc.jpg?v=1793441952"},{"product_id":"hygger-aquarium-wave-maker-1321-gph-12w-cross-flow-pump-with-led-controller-for-60-gallon-tanks","title":"hygger Aquarium Wave Maker 1321 GPH, 12W Cross-Flow Pump with LED Controller for 227 L Tanks","description":"\u003cp\u003e\u003cstrong\u003eThe hygger Aquarium Wave Maker is an adjustable cross-flow pump for circulating freshwater and marine reef aquariums up to 60 gallons (227 L), with a maximum flow rate of 1321 GPH (5,003 L\/h) and 12 W maximum power.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCross-flow circulation spreads soft waves in 360 degrees — moves water across the tank.\u003c\/li\u003e\n\u003cli\u003eFive selectable wave modes — lets you vary the water movement pattern.\u003c\/li\u003e\n\u003cli\u003eFlow and frequency each offer 30–100 levels — provides adjustable operation.\u003c\/li\u003e\n\u003cli\u003eMagnetic mounting fits tank walls up to 1\/2 inch (1.27 cm) thick — allows flexible positioning.\u003c\/li\u003e\n\u003cli\u003e24 V DC power with sine-wave control — supports quiet water circulation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAquarium water movement can be uneven, leaving still areas while other parts of the tank receive stronger flow. This pump is made to circulate water throughout the aquarium with a soft, spreading current. Its adjustable controller and positionable pump let you choose a flow pattern for your setup, whether you want changing surface waves, a stream of small bubbles, or movement near the tank bottom.\u003c\/p\u003e\u003ch3\u003eHow does the cross-flow pump move aquarium water?\u003c\/h3\u003e\u003cp\u003eThe hygger Aquarium Wave Maker spreads its flow in 360 degrees to circulate water across the tank and help eliminate dead spots. Its cross-flow design produces soft waves intended to create movement similar to the ocean, activating water throughout the aquarium. The rotatable head can direct waves from multiple directions, and the pump’s placement changes the effect.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAt the upper side of the tank, its flow can create visible wave shapes.\u003c\/li\u003e\n\u003cli\u003eIn the middle of the tank, it can produce a continuous stream of small bubbles.\u003c\/li\u003e\n\u003cli\u003eAt the bottom, its flow can move debris and accumulated water.\u003c\/li\u003e\n\u003cli\u003eWave movement can create a fish-gathering pattern in the aquarium.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich aquariums can this wave maker fit?\u003c\/h3\u003e\u003cp\u003eThe hygger Aquarium Wave Maker is intended for freshwater and marine reef aquariums up to 60 gallons (227 L). The pump measures 4.8 inches (12.2 cm) long and 1.4 inches (3.6 cm) in diameter, with a maximum flow rate of 1321 GPH (5,003 L\/h). Its magnetic base attaches to tank walls up to 1\/2 inch (1.27 cm) thick, so compare that limit with your aquarium glass before positioning it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaximum power: 12 W.\u003c\/li\u003e\n\u003cli\u003ePower supply: 24 V DC.\u003c\/li\u003e\n\u003cli\u003eThe magnetic base allows the pump to be positioned at different points in the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat settings can I choose on the controller?\u003c\/h3\u003e\u003cp\u003eThe hygger Aquarium Wave Maker uses an LED display controller to adjust wave patterns, flow rate, and frequency. Choose from pulse, sine, constant, random, or cross-flow wave modes; both flow rate and frequency have 30–100 levels. Sine-wave control is designed to move circulating water quietly, with almost no sound heard during operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFeeding mode and night mode are available.\u003c\/li\u003e\n\u003cli\u003eLinkage mode is available among the controller settings.\u003c\/li\u003e\n\u003cli\u003eDifferent mode and level combinations let you tailor water movement to the aquarium.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis wave maker suits aquarium keepers who want adjustable circulation in a freshwater or marine reef tank within its capacity and mounting limits. Its controller offers several wave patterns and additional operating modes, while the cross-flow design spreads movement through the tank. It is sized for aquariums up to 60 gallons and tank walls no thicker than 1\/2 inch (1.27 cm).\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What aquarium size and tank wall thickness does the hygger Aquarium Wave Maker support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hygger Aquarium Wave Maker is designed for freshwater and marine reef aquariums up to 60 gallons, with magnetic mounting for tank walls up to 1\/2 inch thick.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wave settings does the hygger Aquarium Wave Maker offer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hygger Aquarium Wave Maker has pulse, sine, constant, random, and cross-flow modes, adjustable flow and frequency levels from 30–100, plus feeding, night, and linkage modes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"hygger","offers":[{"title":"Default Title","offer_id":55681172996439,"sku":"B0CTBX5VP1","price":96.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/hygger-aquarium-wave-maker-front-view_8ff51c93-83a4-463f-b315-deeb138a9809.jpg?v=1793441950"},{"product_id":"hygger-aquarium-wave-maker-45w-cross-flow-pump-with-led-controller-for-120-cm-tanks","title":"hygger Aquarium Wave Maker, 45W Cross-Flow Pump with LED Controller for 120 cm Tanks","description":"\u003cp\u003e\u003cstrong\u003eThe hygger Aquarium Wave Maker is a 45W adjustable cross-flow pump designed to circulate water throughout freshwater and marine reef aquariums up to 120 cm (47.2 in) long.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e360-degree cross-flow circulation — spreads soft water movement across the aquarium.\u003c\/li\u003e\n\u003cli\u003eFive selectable wave modes — lets you choose different flow patterns.\u003c\/li\u003e\n\u003cli\u003eFlow rate and frequency each adjust across 1–100 levels — gives you fine control over the wave settings.\u003c\/li\u003e\n\u003cli\u003eFeeding, night, and linkage modes — adds dedicated options to the LED controller.\u003c\/li\u003e\n\u003cli\u003eMagnetic mounting for glass up to 0.59 in (1.5 cm) thick — makes it possible to position the pump on the tank wall.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWater movement helps create an active aquarium environment, but circulation from a conventional wave maker may leave quieter areas in a tank. This cross-flow design spreads its flow around the aquarium, helping reduce dead spots and creating a wave pattern intended to resemble ocean movement. Adjust the settings and pump position to shape the circulation for your freshwater or saltwater setup.\u003c\/p\u003e\u003ch3\u003eHow does the cross-flow pump move water?\u003c\/h3\u003e\u003cp\u003eThe pump sends soft waves outward in a 360-degree pattern, circulating water across the tank rather than directing flow in only one line. This is designed to activate water throughout the aquarium and help eliminate dead spots. The resulting movement can also create a fish-gathering shape in the water, adding a visible pattern to the tank.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCross-flow circulation distributes movement around the aquarium.\u003c\/li\u003e\n\u003cli\u003eThe rotatable head lets you direct waves from multiple angles.\u003c\/li\u003e\n\u003cli\u003eThe flow pattern is designed to evoke natural ocean movement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat settings can I control?\u003c\/h3\u003e\u003cp\u003eThe LED display controller offers five wave modes and adjustable flow and frequency, so you can tailor the pump’s pattern and intensity. Choose pulse wave, sine wave, constant wave, random wave, or cross-flow wave, then set the flow rate and frequency to a level from 1 to 100.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFeeding mode provides an option for feeding time.\u003c\/li\u003e\n\u003cli\u003eNight mode offers a separate setting for nighttime.\u003c\/li\u003e\n\u003cli\u003eLinkage mode is also available on the controller.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese options put the wave pattern, flow rate, and frequency at the controller, giving you several ways to set up water movement without relying on one fixed flow pattern.\u003c\/p\u003e\u003ch3\u003eHow does pump position change the water effect?\u003c\/h3\u003e\u003cp\u003eMoving the pump to a different height changes the pattern you see and the way water moves through the tank. Mounted near the upper side, it can produce different visible wave shapes; placed in the middle, it can create a continuous stream of small bubbles that simulates an ocean effect.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUpper-side placement creates visible wave shapes.\u003c\/li\u003e\n\u003cli\u003eMiddle placement can produce a stream of small bubbles.\u003c\/li\u003e\n\u003cli\u003eBottom placement can blow away debris and remove accumulated water.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBottom placement is intended to help keep the tank clean by moving debris and accumulated water. The magnetic base allows the pump to be positioned on the aquarium wall, while the rotatable head helps direct flow from more than one angle. Choose the placement according to the water pattern you want in your aquarium.\u003c\/p\u003e\u003ch3\u003eWhich aquariums can this wave maker fit?\u003c\/h3\u003e\u003cp\u003eThe hygger pump is suitable for freshwater and saltwater aquariums up to 120 cm (47.2 in) in length, with a magnetic base for tank walls up to 0.59 in (1.5 cm) thick. Its body measures 11.6 in (29.5 cm) long and 3.3 in (8.4 cm) in diameter, so compare those dimensions with the space available in your tank.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaximum power: 45W.\u003c\/li\u003e\n\u003cli\u003eMaximum flow rate: 3170 GPH.\u003c\/li\u003e\n\u003cli\u003ePower supply: 24V DC.\u003c\/li\u003e\n\u003cli\u003eSine wave control technology is designed to move circulating water with almost no operating sound heard.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis wave maker suits aquarium keepers looking to adjust circulation and wave patterns in a freshwater or marine tank within its length and glass-thickness limits. Its cross-flow design, multiple controller settings, and position-dependent effects provide concrete ways to shape water movement across the aquarium.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What aquarium size is the hygger Aquarium Wave Maker suitable for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hygger Aquarium Wave Maker is suitable for freshwater and saltwater aquariums up to 120 cm (47.2 in) in length, with tank walls up to 0.59 in (1.5 cm) thick.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wave settings does the hygger Aquarium Wave Maker have?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hygger Aquarium Wave Maker has five wave modes, flow-rate and frequency settings from 1 to 100, plus feeding, night, and linkage modes on its LED controller.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"hygger","offers":[{"title":"Default Title","offer_id":55681173094743,"sku":"B0HDHC8JLG","price":143.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/hygger-aquarium-wave-maker-front-view_c205bbb9-da58-4ba6-bd61-d2249997cc99.jpg?v=1793441951"},{"product_id":"hygger-aquarium-wavemaker-pump-3400-gph-24v-with-led-controller","title":"hygger Aquarium Wavemaker Pump, 3400 GPH 24V with LED Controller","description":"\u003cp\u003e\u003cstrong\u003eThe hygger inverter aquarium wavemaker is a submersible circulation pump for creating adjustable water movement in 75–200 gallon (284–757 L) tanks, with a maximum flow of 3400 GPH (12,870 L\/h) and an LED controller.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSix wave-making modes, 20 strength levels and 99 flow intervals — tailor water movement through the LED controller.\u003c\/li\u003e\n\u003cli\u003eWireless lead-and-follow pump linkage — coordinate multiple compatible wavemaker pumps without a controller cable between them.\u003c\/li\u003e\n\u003cli\u003ePower-off memory and a 10-minute feeding function — resume the selected mode after power returns and pause flow while feeding.\u003c\/li\u003e\n\u003cli\u003eStrong magnetic bracket and operating noise usually below 30 dB — mount the pump securely while keeping aquarium operation quiet.\u003c\/li\u003e\n\u003cli\u003e18 W power, 100–240 V input and DC 24 V output — use the specified electrical setup for freshwater or saltwater aquariums.\u003c\/li\u003e\n\u003cli\u003eAutomatic night mode — the pump adjusts to night operation when the controller is in darkness and night mode is enabled.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFish tanks need water movement to circulate water through the aquarium, and this pump is made for owners who want adjustable flow rather than a single fixed setting. Its propeller impeller moves water to simulate a natural river environment, helping fish swim in moving water while supporting circulation and oxygen levels. It is suitable for freshwater, saltwater and coral aquariums.\u003c\/p\u003e\n\u003ch3\u003eHow can I adjust the water flow?\u003c\/h3\u003e\n\u003cp\u003eUse the LED controller to choose among six wave patterns, 20 strengths and 99 flow intervals. These controls let you set the pump’s water movement to suit the aquarium and the conditions you want to create. The propeller impeller provides the flow used to simulate river-like movement; the pump is designed to circulate tank water, not to provide a fixed, unadjustable stream.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelect from modes M1–M6 on the controller.\u003c\/li\u003e\n\u003cli\u003eSet the feeding function to a 10-minute countdown when feeding time calls for a pause in normal flow.\u003c\/li\u003e\n\u003cli\u003eThe controller display switches off automatically after 30 seconds without an operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan it work with other wavemaker pumps?\u003c\/h3\u003e\n\u003cp\u003eYes. The pump can run by itself or link wirelessly with other wavemaker pumps in a lead-and-follow arrangement. The lead pump sends control instructions to follower pumps so they operate together, giving you a coordinated setup when using more than one pump.\u003c\/p\u003e\n\u003cp\u003eKeep paired controllers within 15 meters (49.2 ft) of one another for the wireless signal to reach. This linkage is for coordinating compatible hygger wavemaker pumps; the pump can also be operated solo when you do not need a multi-pump setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChoose one pump to lead and the others to follow.\u003c\/li\u003e\n\u003cli\u003eWireless instructions synchronize follower pumps with the lead pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat tank size and water type is it made for?\u003c\/h3\u003e\n\u003cp\u003eThis 18 W circulation pump is intended for aquariums from 75 to 200 gallons (284 to 757 L), including freshwater and saltwater tanks and coral aquariums. Its maximum flow is 3400 GPH, and moving water through the tank can help increase oxygen levels. The stated electrical specifications are 100–240 V input and DC 24 V output.\u003c\/p\u003e\n\u003cp\u003eUse the tank’s gallon capacity to judge whether it falls within the pump’s stated range. It is a submersible aquarium power head for water circulation, with the propeller producing flow inside the tank.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow rate: 3400 GPH.\u003c\/li\u003e\n\u003cli\u003eOutput voltage: DC 24 V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow does it stay in place, and what happens at night?\u003c\/h3\u003e\n\u003cp\u003eA strong magnetic bracket holds the submersible pump against the aquarium and is designed to reduce the chance of it falling. Operating noise is usually below 30 dB. When night mode is switched on, the pump automatically enters that mode when the controller is in darkness.\u003c\/p\u003e\n\u003cp\u003eThe power-off memory function brings the pump back to its previous operating mode, M1–M6, after power is restored, so you do not have to select that mode again. Together, the magnetic mount, memory function and automatic night response support routine aquarium operation with fewer manual adjustments.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMagnetic mounting keeps the pump attached inside the aquarium.\u003c\/li\u003e\n\u003cli\u003ePower restoration returns the pump to its previous wave mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe hygger inverter wavemaker suits freshwater, saltwater and coral aquarium keepers who want adjustable circulation in a 75–200 gallon tank, with options for solo use or wireless coordination with other pumps. Its 3400 GPH maximum flow, programmable wave settings and submersible magnetic mounting make it an aquarium circulation pump designed for controlled water movement.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What aquarium size is the hygger inverter wavemaker pump for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hygger inverter wavemaker pump is intended for 75–200 gallon aquariums and is suitable for freshwater, saltwater and coral tanks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the hygger wavemaker pump link with other pumps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hygger wavemaker pump can run solo or link wirelessly in a lead-and-follow setup; paired controllers should be within 15 meters (49.2 ft).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"hygger","offers":[{"title":"Default Title","offer_id":55681188495703,"sku":"B0BHNRZWDZ","price":99.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/hygger-inverter-wavemaker-pump-front-view.jpg?v=1793442259"},{"product_id":"jebao-wi-fi-aquarium-dosing-pump-4-channel-doser-2-4-with-app-control","title":"Jebao Wi-Fi Aquarium Dosing Pump, 4-Channel Doser 2.4 with App Control","description":"\u003cp\u003eJebao Doser 2.4 is a Wi-Fi aquarium dosing pump designed to automate liquid additions, with four independently controlled peristaltic pump heads for dosing aquarium supplements and plant fertilizers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2.4G Wi-Fi app control for iOS and Android — set dosing schedules from a smartphone.\u003c\/li\u003e\n\u003cli\u003eProgrammable volumes from 0.1 ml to 9,999 ml — choose the amount for each scheduled dose.\u003c\/li\u003e\n\u003cli\u003eIndividual volumetric calibration for every channel — calibrate dosing amounts channel by channel.\u003c\/li\u003e\n\u003cli\u003eUp to 24 doses per day, with custom-day scheduling — set dosing frequency around your aquarium routine.\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant peristaltic tubing and quick-change pump head assemblies — designed for 24\/7 continuous operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAdding liquid supplements by hand can mean repeated measuring and mixing. Jebao Doser 2.4 automates scheduled additions for aquarium keepers who want consistent dosing without preparing supplements every day. Its controller supports both small and large dosing increments, making the pump suitable for different dosing needs in aquarium setups.\u003c\/p\u003e\n\u003ch3\u003eWhat liquids can the Jebao Doser 2.4 dispense?\u003c\/h3\u003e\n\u003cp\u003eThe pump is made for scheduled liquid additions such as calcium, alkalinity, magnesium, trace elements, and liquid plant fertilizers. Its four pump heads are controlled independently, so each channel can be programmed for its own dosing requirements. Automating these additions is designed to help maintain stable tank parameters and prevent parameter swings in sensitive reef displays.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour peristaltic pump heads support separate liquid dosing channels.\u003c\/li\u003e\n\u003cli\u003eUse the channels for aquarium supplements or liquid plant fertilizer.\u003c\/li\u003e\n\u003cli\u003eAutomated dosing removes the need to mix supplements daily.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow do scheduling and dose calibration work?\u003c\/h3\u003e\n\u003cp\u003eUse the smartphone app to set liquid volumes, daily timing, and multi-dose intervals for each pump head. A channel can be scheduled to dose up to 24 times per day, or dosing can be arranged across custom days. Calibrate each channel by volume to help make its milliliter doses consistent; the pump is plug and play after calibration with a 100 ml graduated cylinder.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter dose volumes from 0.1 ml to 9,999 ml.\u003c\/li\u003e\n\u003cli\u003eControl the pump through a 2.4G Wi-Fi connection using an iOS or Android smartphone.\u003c\/li\u003e\n\u003cli\u003eSet individual schedules and dosing intervals for the channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat is included, and what are the pump’s power and size?\u003c\/h3\u003e\n\u003cp\u003eThe package contains one Jebao Doser 2.4 dosing pump, one power adapter, and one manual. The pump measures 8.25 x 5.15 x 2.35 in (20.96 x 13.08 x 5.97 cm) and operates at DC 12 V and 7.5 W. Its listed maximum flow rate is 50 L\/m, and its maximum head height is 1.5 m (4.9 ft).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne dosing pump, power adapter, and manual are included.\u003c\/li\u003e\n\u003cli\u003eCalibrate with a 100 ml graduated cylinder before use; the cylinder is not identified as a package item.\u003c\/li\u003e\n\u003cli\u003eQuick-change pump head assemblies support replacement of the pump heads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eJebao Doser 2.4 suits aquarium keepers who want smartphone-programmed, scheduled dosing for liquid supplements or plant fertilizers, including reef keepers managing additions across custom intervals. It combines four individually controlled peristaltic channels with volumetric calibration and automated scheduling for measured liquid dosing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What can the Jebao Doser 2.4 dispense?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Jebao Doser 2.4 dispenses scheduled liquid additions such as calcium, alkalinity, magnesium, trace elements, and liquid plant fertilizers through four independently controlled pump heads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many doses can I schedule with the Jebao Doser 2.4?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Jebao Doser 2.4 can be programmed for up to 24 doses per day per pump head, with custom-day schedules and dose volumes from 0.1 ml to 9,999 ml.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Jebao","offers":[{"title":"Default Title","offer_id":55681191936343,"sku":"B08779W93M","price":133.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/jebao-doser-2-4-front-view.jpg?v=1793442302"},{"product_id":"jebao-dp-4-programmable-aquarium-dosing-pump-black-4-channels","title":"Jebao DP-4 Programmable Aquarium Dosing Pump, Black, 4 Channels","description":"\u003cp\u003e\u003cstrong\u003eThe Jebao DP-4 is a programmable aquarium dosing pump for dispensing supplements and other liquids, with four independently controlled channels and up to 24 dosing times per channel each day.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour dosing channels — schedule different liquids independently.\u003c\/li\u003e\n\u003cli\u003eUp to 24 dosing times per channel per day — automate repeated dosing.\u003c\/li\u003e\n\u003cli\u003e1–9,999 mL per channel per day — set dosing amounts in small or large increments.\u003c\/li\u003e\n\u003cli\u003ePower supply, soft tubing and a four-tube fixture included — supplies the listed pump accessories.\u003c\/li\u003e\n\u003cli\u003eSix-month manufacturer warranty — covers replacement of parts that fail because of manufacturing errors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRegular aquarium dosing can mean measuring and adding supplements by hand each day. The DP-4 automates scheduled dispensing to help keep tank parameters stable and remove the need for daily supplement mixing. It is designed for calcium, magnesium, AB water and other liquids, with separate programming for each channel.\u003c\/p\u003e\n\u003ch3\u003eHow many liquids can the Jebao DP-4 dose?\u003c\/h3\u003e\n\u003cp\u003eThe Jebao DP-4 doses up to four liquids through four separate channels. Each pump can be programmed individually, so dosing times and amounts can be set for the liquids assigned to each channel. The controller supports dosing up to 24 times a day, and the interval setting supports a 30-day dosing interval.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour-channel pump design.\u003c\/li\u003e\n\u003cli\u003eQ max: 70 L\/m.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat liquids and dosing amounts suit the DP-4?\u003c\/h3\u003e\n\u003cp\u003eThe Jebao DP-4 is intended for calcium, magnesium, AB water or other liquids used for aquarium dosing. Each channel provides 1 to 9,999 mL per day, allowing programming for small or large daily amounts. Automated, individually set dosing is designed to help maintain stable tank parameters without daily manual mixing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEach channel has its own programming.\u003c\/li\u003e\n\u003cli\u003eDaily output range: 1 to 9,999 mL per channel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat is included, and what setup does the DP-4 need?\u003c\/h3\u003e\n\u003cp\u003eThe Jebao DP-4 comes with a power supply, soft tubing and a four-tube fixture. Calibrate the pump before use with a 100 mL graduated cylinder or measuring cup; that measuring vessel is not included. Once calibrated, the pump is plug and play. The user manual and guide are available on this page.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower input: 110–240 V, 50\/60 Hz.\u003c\/li\u003e\n\u003cli\u003eDimensions: 9.25 x 5.11 x 2.55 in (23.5 x 15 x 6.5 cm).\u003c\/li\u003e\n\u003cli\u003eSix-month warranty covers replacement of parts that fail due to manufacturing errors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe DP-4 suits aquarium keepers who want to automate separate liquid dosing schedules, including calcium, magnesium and AB water. It is a four-channel dosing pump that requires calibration with a separate measuring vessel before its first use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many dosing schedules can the Jebao DP-4 run?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Jebao DP-4 has four independently programmable channels, and each channel can be scheduled to dose up to 24 times per day.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes with the Jebao DP-4 dosing pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Jebao DP-4 includes a power supply, soft tubing and a four-tube fixture. A 100 mL measuring cylinder or cup for calibration is not included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Jebao","offers":[{"title":"Default Title","offer_id":55681204322647,"sku":"B014KKCILE","price":113.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/jebao-dp-4-dosing-pump-front-view.jpg?v=1793442559"},{"product_id":"jebao-mcp-90-cross-flow-aquarium-pump-3-300-gph-with-wi-fi-app-control","title":"Jebao MCP-90 Cross Flow Aquarium Pump, 3,300 GPH with Wi-Fi App Control","description":"\u003cp\u003e\u003cstrong\u003eThe Jebao MCP-90 Smart Cross Flow Pump circulates water through marine reef aquariums with up to 3,300 GPH (12,500 L\/h) flow and a compact 11 × 2 × 1.5 in (27.94 × 5.08 × 3.81 cm) body.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e360-degree cross-flow design — spreads laminar flow across the aquarium to help eliminate dead spots.\u003c\/li\u003e\n\u003cli\u003eWi-Fi and Bluetooth app control — lets you set wave programs, daily schedules, and pump speed from a smartphone.\u003c\/li\u003e\n\u003cli\u003eSine-wave motor technology — designed to dampen motor hum and electrical vibration.\u003c\/li\u003e\n\u003cli\u003eVariable flow for 30 to 90+ gallon (114 to 341+ L) marine reef aquariums — accommodates a range of tank sizes.\u003c\/li\u003e\n\u003cli\u003eIC detection and rotor protections — includes dry-running and locked-rotor protection, plus automatic power-off when there is no water.\u003c\/li\u003e\n\u003cli\u003eExternal magnetic bracket — attaches to aquarium glass and can be repositioned along the tank wall.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eReef tanks need water movement that reaches beyond a narrow stream from a conventional wavemaker. The MCP-90 uses crossflow circulation to distribute flow broadly through the aquarium, making it suitable for marine displays with SPS and LPS corals. Smartphone controls also make it useful when you want to adjust water movement or set a repeating daily schedule without changing the pump manually.\u003c\/p\u003e\u003ch3\u003eHow does the MCP-90 move water through a reef tank?\u003c\/h3\u003e\u003cp\u003eThe MCP-90 produces broad, evenly distributed laminar flow with a 360-degree cross-flow pattern. Water returns directly to the pump, creating a circulation style intended to reduce stagnant areas and recreate the movement of natural ocean currents. This flow pattern is designed for aquariums housing SPS and LPS corals, which are the coral types identified for this pump.\u003c\/p\u003e\u003cp\u003eThe pump offers a stated adjustable range of 2,700 to 3,300 GPH (10,220 to 12,500 L\/h). Its crossflow approach differs from a focused stream by spreading water movement across the aquarium rather than directing it through a single narrow flow path.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e360-degree cross-flow circulation returns water directly to the pump.\u003c\/li\u003e\n\u003cli\u003eBroad laminar movement is intended to reach across the aquarium.\u003c\/li\u003e\n\u003cli\u003eThe flow pattern is designed for marine reef tanks with SPS or LPS corals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat aquarium size and power setup does it suit?\u003c\/h3\u003e\u003cp\u003eThe MCP-90 is intended for 30 to 90+ gallon marine reef aquariums, with a variable output reaching 3,300 GPH. Its listed dimensions are 11 × 2 × 1.5 in (27.94 × 5.08 × 3.81 cm), a compact form for placement along a tank wall. The power specifications are 100–240 V, 50\/60 Hz, DC 24 V, and 25 W, with a US three-prong plug.\u003c\/p\u003e\u003cp\u003eIts external magnetic bracket holds the pump against aquarium glass and allows repositioning along the wall. The stated fit is for thick aquarium glass, but no glass-thickness range is provided; compare the pump’s dimensions with your intended mounting location before setting it up.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for marine reef aquariums from 30 to 90+ gallons.\u003c\/li\u003e\n\u003cli\u003eMagnetic mounting supports placement and repositioning along tank walls.\u003c\/li\u003e\n\u003cli\u003eUses a US three-prong plug with the listed 100–240 V, 50\/60 Hz input.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow are flow settings controlled, and what protections are built in?\u003c\/h3\u003e\u003cp\u003eUse the smartphone app over Wi-Fi or Bluetooth to adjust pump speed, create custom wave programs, and schedule flow across a 24-hour day. The dual wireless connection options provide app-based control for changing circulation settings to suit your aquarium routine.\u003c\/p\u003e\u003cp\u003eElectronic sine-wave motor technology is designed to reduce motor hum and electrical vibration in marine display tanks. The pump also includes IC electronic detection, dry-running and locked-rotor protection, and automatic power-off when no water is detected. These protections address operating conditions involving a dry pump or a blocked rotor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWi-Fi and Bluetooth provide two wireless app connection options.\u003c\/li\u003e\n\u003cli\u003eApp functions include speed adjustment, custom wave programming, and 24-hour scheduling.\u003c\/li\u003e\n\u003cli\u003eAutomatic power-off activates when the pump detects no water.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Jebao MCP-90 is suited to reef aquarium keepers who want broad crossflow circulation, app-adjustable scheduling, and magnetic wall mounting in one pump. Its 2,700 to 3,300 GPH variable output, 25 W power specification, and stated 30 to 90+ gallon aquarium range define the setup it is designed to serve.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What aquarium size is the Jebao MCP-90 Smart Cross Flow Pump designed for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Jebao MCP-90 Smart Cross Flow Pump is designed for 30 to 90+ gallon marine reef aquariums and provides variable flow from 2,700 to 3,300 GPH.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I control the Jebao MCP-90 Smart Cross Flow Pump from a phone?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Jebao MCP-90 Smart Cross Flow Pump connects through Wi-Fi and Bluetooth for app-based speed adjustments, custom wave programs, and 24-hour flow scheduling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Jebao","offers":[{"title":"Default Title","offer_id":55681382023511,"sku":"B096YQ3ZJ9","price":158.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/jebao-mcp-90-cross-flow-pump-front.jpg?v=1793444795"},{"product_id":"jerepet-aquarium-return-pump-3170-gph-24v-dc-with-controller","title":"JEREPET Aquarium Return Pump, 3170 GPH, 24V DC with Controller","description":"\u003cp\u003eJEREPET is a submersible aquarium return pump designed to move water in freshwater and saltwater setups, with a maximum flow of 3170 GPH (12,000 L\/h) and 24V DC operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3170 GPH maximum flow — moves water through aquarium and other compatible water systems.\u003c\/li\u003e\n\u003cli\u003e19.7 ft (6 m) maximum lift — supports water movement to elevated return points.\u003c\/li\u003e\n\u003cli\u003e86W ECO pump with controller — provides adjustable operation for different flow needs.\u003c\/li\u003e\n\u003cli\u003eSix speed settings from 30% to 100%, plus a 10-minute feeding mode and wave-maker function — lets you adjust flow for different moments.\u003c\/li\u003e\n\u003cli\u003eSealed impeller and ceramic shaft, with noise below 30 dBA — supports quiet pump operation.\u003c\/li\u003e\n\u003cli\u003eAutomatic shutoff if the pump runs dry or becomes blocked — provides a protective stop in those conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor aquarium owners and water-feature users, selecting a pump means matching flow, lift, and installation style to the setup. JEREPET is made for submersible use and can serve as a sump pump in freshwater or saltwater aquariums, as well as for fountains, hydroponics, and waterfalls.\u003c\/p\u003e\n\u003ch3\u003eHow can I adjust the JEREPET pump’s water flow?\u003c\/h3\u003e\n\u003cp\u003eThe controller offers six speed settings, covering 30% to 100% of maximum flow. Use the 10-minute feeding mode when pausing normal flow during feeding, or select the wave-maker function when that mode suits your setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable output gives you a choice of six flow levels.\u003c\/li\u003e\n\u003cli\u003eFeeding mode runs for 10 minutes.\u003c\/li\u003e\n\u003cli\u003eWave-maker function is available through the controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat size is the JEREPET pump, and how should it be installed?\u003c\/h3\u003e\n\u003cp\u003eThe pump measures 8.3 × 4.1 × 5.2 in (21.1 × 10.4 × 13.2 cm) and is intended to operate submerged. Its maximum lift is 19.7 ft (6 m), a useful figure to compare with the height of your return point.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlace the pump for submersible operation.\u003c\/li\u003e\n\u003cli\u003eCompare the available installation space with the pump’s dimensions.\u003c\/li\u003e\n\u003cli\u003eConsider the vertical distance water must travel when planning the return route.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich water systems can use the JEREPET pump?\u003c\/h3\u003e\n\u003cp\u003eJEREPET can be used in freshwater and saltwater aquarium sumps, fountains, hydroponics systems, and waterfalls. Its sealed impeller and ceramic shaft support efficient operation, with a noise level below 30 dBA.\u003c\/p\u003e\n\u003cp\u003eThe pump automatically shuts off if it runs dry or becomes blocked. Keep it submerged during operation and ensure the installation allows water to reach the pump.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable applications include aquarium sump circulation, fountains, hydroponics, and waterfalls.\u003c\/li\u003e\n\u003cli\u003eDry running and blockage trigger automatic shutoff.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eJEREPET is suited to aquarium keepers and water-feature users who need a submersible pump with adjustable flow and a controller for feeding or wave-making modes. Its stated applications, lift capacity, and compact dimensions help match it to a planned installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum flow and lift of the JEREPET aquarium return pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The JEREPET aquarium return pump has a maximum flow of 3170 GPH (12,000 L\/h) and a maximum lift of 19.7 ft (6 m).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the JEREPET aquarium return pump be used in saltwater?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The JEREPET aquarium return pump is designed for submersible use in freshwater or saltwater aquarium sumps, and it can also be used for fountains, hydroponics, and waterfalls.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JEREPET","offers":[{"title":"Default Title","offer_id":55681391755607,"sku":"B08P3454YC","price":153.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/jerepet-aquarium-return-pump-front-view.jpg?v=1793444943"},{"product_id":"jerepet-aquarium-water-pump-800-gph-24v-dc-with-six-speeds-and-quiet-operation","title":"JEREPET Aquarium Water Pump, 800 GPH 24V DC, with Six Speeds and Quiet Operation","description":"\u003cp\u003e\u003cstrong\u003eJEREPET is a 24V DC aquarium and return pump for circulating water in fish tanks, sumps, fountains and hydroponic systems, with up to 800 GPH (3,028 L\/h) flow and six adjustable speeds.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e800 GPH maximum flow at 0 ft (0 m) lift with the largest nozzle — gives you a clear reference for its flow rating.\u003c\/li\u003e\n\u003cli\u003eSix speed settings from 30% to 100% — lets you adjust circulation to your setup.\u003c\/li\u003e\n\u003cli\u003e10-minute feeding mode and wave-maker function — supports feeding routines and changing water movement.\u003c\/li\u003e\n\u003cli\u003eSealed impeller and ceramic shaft; noise below 30 dBA — designed for quiet, efficient operation.\u003c\/li\u003e\n\u003cli\u003eAutomatic shutoff if the pump runs dry or becomes blocked — helps protect the pump in these conditions.\u003c\/li\u003e\n\u003cli\u003eSubmersible or external\/inline use in fresh or salt water — suits a range of aquarium and water-feature setups.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eChoose a pump that can match your desired circulation and installation style, whether you are maintaining an aquarium, running a sump, or moving water through a fountain or hydroponic system. The JEREPET controller provides adjustable flow and a feeding mode, while the pump's automatic shutoff responds to dry running or blockage.\u003c\/p\u003e\u003ch3\u003eHow much water can the JEREPET pump move?\u003c\/h3\u003e\u003cp\u003eThe JEREPET aquarium pump reaches a maximum flow of 800 GPH (3,028 L\/h) when used with the largest nozzle at 0 ft (0 m) of lift. Its listed maximum lift is 12.5 ft (3.81 m), so flow capacity and lift are separate operating measures. The product title contains a 30W\/16FT designation; the detailed specifications give ECO 28W and a maximum lift of 12.5 ft (3.81 m).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower specification: ECO 28W, DC 24V.\u003c\/li\u003e\n\u003cli\u003ePump dimensions: 5.4 x 2.6 x 3.4 inches (13.7 x 6.6 x 8.6 cm).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat controls and operating modes does it have?\u003c\/h3\u003e\u003cp\u003eThe JEREPET pump has a controller with six speed settings, allowing flow adjustment from 30% to 100% of maximum flow. Use the 10-minute feeding mode during feeding, or select the wave-maker function for changing water movement. These controls give you options for matching circulation to the task rather than running only at one fixed setting.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdjustable range: 30%–100% of maximum flow.\u003c\/li\u003e\n\u003cli\u003eDedicated feeding mode duration: 10 minutes.\u003c\/li\u003e\n\u003cli\u003eWave-maker function is included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCan it be used in an aquarium, sump or water feature?\u003c\/h3\u003e\u003cp\u003eThe JEREPET return pump can operate submerged or as an external\/inline pump, and it is suitable for freshwater and saltwater use. Its stated applications include aquariums, aquarium sumps, fountains, hydroponics, waterfalls and ponds, making it useful for different water-circulation arrangements.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInstallation options: submersible or external\/inline.\u003c\/li\u003e\n\u003cli\u003eWater types: fresh water and salt water.\u003c\/li\u003e\n\u003cli\u003eApplications include aquarium return circulation and water features.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat happens if the pump runs dry or becomes blocked?\u003c\/h3\u003e\u003cp\u003eThe JEREPET pump automatically shuts off if it runs dry or becomes blocked. Its sealed impeller and ceramic shaft support its stated quiet operating design, with noise below 30 dBA. If the pump does not operate, check the controller and power-supply light status and refer to the user manual.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAutomatic shutoff responds to dry running or blockage.\u003c\/li\u003e\n\u003cli\u003eNoise level: below 30 dBA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis pump suits aquarium keepers and water-feature users who want adjustable circulation, a choice of submerged or inline installation, and compatibility with fresh or salt water. Its 800 GPH maximum-flow rating, controller functions and dry-run or blockage shutoff make it a fit for circulation tasks across aquariums, sumps and listed water-feature applications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum flow rate of the JEREPET aquarium pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The JEREPET aquarium pump has a maximum flow of 800 GPH (3,028 L\/h) with the largest nozzle at 0 ft (0 m) lift.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the JEREPET aquarium pump run submerged or inline?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The JEREPET aquarium pump can be used as a submersible or external\/inline pump in freshwater or saltwater setups.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JEREPET","offers":[{"title":"Default Title","offer_id":55681391919447,"sku":"B08P34MCVN","price":93.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/jerepet-aquarium-pump-product-view.jpg?v=1793444942"},{"product_id":"jebao-mcp-180-wifi-aquarium-wave-maker-pump-6-736-9-642-gph-crossflow","title":"Jebao MCP-180 WiFi Aquarium Wave Maker Pump, 6,736–9,642 GPH Crossflow","description":"\u003cp\u003e\u003cstrong\u003eThe Jebao MCP-180 is a WiFi-controlled cross flow aquarium wave maker designed to circulate water in a 360-degree pattern, with a listed flow range of 6736–9642 GPH.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCrossflow design returns water around the pump — helping create broad circulation without dead spots.\u003c\/li\u003e\n\u003cli\u003eWiFi control for iOS and Android, plus a manual LCD controller — adjust circulation and wave settings.\u003c\/li\u003e\n\u003cli\u003eFour selectable flow modes — choose classic wave, sine wave, random wave or constant flow.\u003c\/li\u003e\n\u003cli\u003eDry-running and locked-rotor protection — electronic detection shuts the pump down when no water is detected.\u003c\/li\u003e\n\u003cli\u003eRated power of 65W, with 100–240V 50\/60Hz input and DC 24V output — check electrical fit for your aquarium setup.\u003c\/li\u003e\n\u003cli\u003eA 10-minute feeding pause — stop circulation briefly, then return to the regular routine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMarine and reef aquariums need water movement suited to their rockwork and livestock. The MCP-180 combines crossflow circulation with adjustable wave settings, so you can select a pattern for your aquarium layout and change settings using the app or the included manual LCD controller.\u003c\/p\u003e\n\u003ch3\u003eHow does the MCP-180 circulate aquarium water?\u003c\/h3\u003e\n\u003cp\u003eIts crossflow system uses a double impeller design to create broad water movement, with flow returning directly around the pump through 360 degrees. This approach is designed to help avoid dead spots and create a different flow pattern from a conventional wavemaker. Position the pump to suit the rockwork and livestock flow needs in your aquarium.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eListed flow range: 6736–9642 GPH.\u003c\/li\u003e\n\u003cli\u003eSine wave motor supports smooth operation and adjustable circulation.\u003c\/li\u003e\n\u003cli\u003eDesigned for water movement in marine and reef aquariums.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich wave settings and controls are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose classic wave, sine wave, random wave or constant flow. The pump supports WiFi adjustment through iOS and Android, and also has a manual LCD controller for changing aquarium circulation and wave settings.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlternating shift to flow mode requires two pumps operating together.\u003c\/li\u003e\n\u003cli\u003eShort-press the stop button for a 10-minute pause during feeding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill the MCP-180 fit my aquarium setup?\u003c\/h3\u003e\n\u003cp\u003eThe pump measures 13 x 3 x 1.6 inches (33.02 x 7.62 x 4.064 cm), so compare these dimensions with your intended mounting space. Its electrical specifications are 100–240V 50\/60Hz input, DC 24V output and 65W rated power, with a 3-prong US plug.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eElectronic protection detects dry running and a locked rotor.\u003c\/li\u003e\n\u003cli\u003eWhen no water is detected, the pump shuts down automatically.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Jebao MCP-180 suits marine and reef aquarium owners looking for adjustable crossflow and multiple wave patterns, with app and manual controls. Its double impeller design, selectable modes and stated size make it a pump for aquarium circulation rather than a general-purpose water pump.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What flow modes does the Jebao MCP-180 wave maker pump offer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Jebao MCP-180 wave maker pump offers classic wave, sine wave, random wave and constant flow modes. Alternating shift to flow mode requires two pumps operating together.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How can I control the Jebao MCP-180 wave maker pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Jebao MCP-180 wave maker pump supports WiFi control with iOS and Android, plus a manual LCD controller for adjusting circulation and wave settings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Jebao","offers":[{"title":"Default Title","offer_id":55681597342039,"sku":"B099QBL89S","price":231.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/jebao-mcp-180-wave-maker-front-view.jpg?v=1793445979"},{"product_id":"hygger-1060gph-aquarium-water-pump-33w-adjustable-submersible-or-external-return-pump","title":"hygger 1060GPH Aquarium Water Pump, 33W Adjustable Submersible or External Return Pump","description":"\u003cp\u003e\u003cstrong\u003eThe hygger 1060GPH water pump is a 33W return pump for aquariums, ponds, fountains, sumps and hydroponics, with adjustable flow and a 13.1 ft (3.99 m) maximum head.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e71 flow settings from 30% to 100% — adjust the pump’s output to suit your setup.\u003c\/li\u003e\n\u003cli\u003eSubmersible or external operation, with fittings for 1 in (2.54 cm) or 3\/4 in (1.91 cm) pipes — choose a suitable connection for your plumbing.\u003c\/li\u003e\n\u003cli\u003eAutomatic shutoff when water is absent or too low, plus two removable intake screens — select a screen for a normal or low water level.\u003c\/li\u003e\n\u003cli\u003eExternal LED controller with Up, Down and Pause buttons — change or pause the pump from the controller.\u003c\/li\u003e\n\u003cli\u003eCeramic shaft and magnetic drive, with no copper element — made for fresh or salt water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse this return pump when you need water movement in an aquarium, pond, fountain, sump or hydroponic system. Its adjustable output and choice of submerged or external placement let you configure it for different setups. The controller is not waterproof and must be kept indoors, so plan its location separately from the pump.\u003c\/p\u003e\n\u003ch3\u003eHow do I adjust the water flow?\u003c\/h3\u003e\n\u003cp\u003eThe external controller lets you select one of 71 flow settings between 30% and 100% of the pump’s top speed. Use the Up and Down buttons to change the setting, or press Pause to stop the pump’s flow. The pump switches on when plugged in and off when unplugged.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput: 100–240V, 50\/60Hz; output: DC 24V.\u003c\/li\u003e\n\u003cli\u003ePower consumption: 33W.\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 1060GPH (approximately 4,012 L\/h).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan I use this pump submerged or outside the water?\u003c\/h3\u003e\n\u003cp\u003eYes, the hygger pump supports both submerged and external installation. It comes with pipe connection fittings for 1 in or 3\/4 in pipes. The pump measures 6.2 x 3.1 x 5 in (15.7 x 7.9 x 12.7 cm), so compare those dimensions with the space available for your setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe cord from the pump to the controller is 6 ft (1.83 m).\u003c\/li\u003e\n\u003cli\u003eThe power cord is 6.6 ft (2.01 m).\u003c\/li\u003e\n\u003cli\u003eThe controller is not waterproof; place it indoors.\u003c\/li\u003e\n\u003cli\u003eA 10 ft (3.05 m) extension cord is needed when extending the distance between the controller and pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat happens if the water level drops?\u003c\/h3\u003e\n\u003cp\u003eThe pump automatically shuts off when it senses no water or a water level that is too low. Two removable intake screens are provided: one for a normal water level and one for a low water level. For the low-level screen, the water must be higher than 0.8 in (2.03 cm).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChoose the screen that suits the water level where the pump will operate.\u003c\/li\u003e\n\u003cli\u003eThe ceramic shaft and magnetic drive are designed to support a long service life.\u003c\/li\u003e\n\u003cli\u003eThe pump has no copper element and can be used in fresh or salt water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis hygger return pump suits aquarium, pond, fountain, sump and hydroponic setups that need adjustable water flow and a choice of submerged or external placement. It is a practical fit when the controller can stay indoors and the pump’s dimensions and pipe connections match the installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What power and cord lengths does the hygger water pump use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hygger water pump takes 100–240V, 50\/60Hz input and outputs DC 24V. Its pump-to-controller cord is 6 ft, and its power cord is 6.6 ft.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes with the hygger water pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hygger water pump includes screws, O-rings, pipe connection fittings and two removable intake screens for normal or low water levels.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"hygger","offers":[{"title":"Default Title","offer_id":55681834320215,"sku":"B07W141HYD","price":130.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/files\/hygger-water-pump-front-view.jpg?v=1793446665"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1056\/4780\/0663\/collections\/jerepet-aquarium-pump-front-view.jpg?v=1793477802","url":"https:\/\/bathpetsupplies.co.uk\/collections\/aquarium-water-pumps.oembed","provider":"BathPetSupplies","version":"1.0","type":"link"}