Billionchains Automatic Dog Water Bowl, 2L Outdoor Dispenser with Float Valve and 1.5 m Hose

Billionchains is a 2L automatic water bowl for animals, designed to refill from a compatible 3/4” GHT faucet through its 5ft hose.

• Built-in float valve — refills the bowl and shuts off water when it reaches the set level.
• 2L bowl capacity — holds water for animals to drink from.
• 5ft water hose — connects the bowl to the faucet.
• Adapter for a 3/4” GHT faucet — connects the hose to the specified faucet type.
• Waterproof tape included — helps seal the faucet connection during installation.
• Made for dogs, cats and other animals — suits use with goats, rabbits, ducks, chickens and farm animals too.

This automatic waterer is made for situations where animals need access to water without someone repeatedly topping up a bowl by hand. It can be used outdoors and is especially useful in hot summer conditions. Water flows into the bowl without splashing or making noise, so animals can drink without being disturbed by a noisy or splashy refill.

How does the automatic refill work?

Once connected to a faucet and turned on, water flows into the bowl until the built-in float valve reaches its shutoff level. The valve then stops the flow to prevent overflow, and allows the bowl to refill as its water level drops. This gives animals access to water without requiring manual refills each time the bowl needs topping up.

• The float valve controls filling and shutoff.
• Water is supplied through the connected hose.

Which faucet does the bowl connect to?

The supplied adapter is intended only for a 3/4” GHT faucet. Use the included hose and adapter for this setup; the product instructions say not to use a different hose. Washers are fitted inside both the hose and adapter, so make sure they are in place before connecting the parts.

• Check that the faucet connection is the specified 3/4” GHT type.
• Avoid opening the faucet to maximum water flow.

What comes with the water bowl, and how is it installed?

The package includes the water hose, faucet adapter and waterproof tape. To set it up, attach the adapter to the faucet, use the supplied tape around the faucet interface, connect one end of the hose to the adapter, then connect the other end to the bowl’s water inlet. Turn on the faucet to supply water to the bowl.

• Use the supplied tape at the faucet joint to help improve the seal.
• If the connection leaks, the instructions advise fitting an extra washer onto the adapter so two washers are in place.

This waterer suits pet owners and animal keepers who want a faucet-fed bowl for outdoor access to drinking water. It is intended for use with the specified faucet connection and supplied hose, rather than as a standalone bowl that is filled by hand. Its float valve controls the refill, while the hose and adapter connect it to the water source.