BV 18.3 m Aerial Dog Trolley System with 3 m Runner, Reflective Cable, 56.7 kg Capacity

BV’s aerial pet trolley system gives dogs a defined outdoor run area with a 60-foot steel cable, a 10-foot runner, and support for dogs up to 125 lb (56.7 kg).

• 60-foot main cable and 10-foot runner — create an overhead route for supervised outdoor movement.
• Supports dogs up to 125 lb (56.7 kg) — built for dogs within the stated weight limit.
• Up to 1,200 sq ft (111.5 m²) of play area — gives a dog room to move while remaining within sight.
• Vinyl-covered, reflective cables — help resist rain and rust and improve visibility at night.
• Spring, pulley, and 360-degree swivel clips — allow the runner to move along the line and help reduce tangling and strain from sudden pulls.

This overhead run is made for yards and other outdoor settings where a dog needs room to move within a set area. It can also be used for camping or RV travel when there are suitable fixed anchor points. The system is a trolley run, not a walking leash: its purpose is to provide a moving outdoor tie-out route while keeping the dog in sight.

How much room does the BV aerial trolley provide?

The 60-foot (18.3 m) main cable and 10-foot (3.05 m) runner can provide up to 1,200 sq ft (111.5 m²) of play area. The pulley travels along the overhead cable as the dog moves, while the runner connects the dog to the moving line. A built-in spring absorbs sudden pulls and is designed to reduce strain on the dog’s neck.

• The system is for dogs weighing up to 125 lb (56.7 kg).
• Swivel clips rotate 360 degrees to help the line stay untangled during movement.
• The overhead arrangement keeps the run within a defined area rather than functioning as a walking leash.

What comes with the trolley system, and how is it made?

The system includes two steel cables: one measuring 60 feet and one measuring 10 feet. The cables have a vinyl covering to help protect against rain and rust, and the cover is reflective for visibility at night. The stake, cable, and swivel clips are made from steel.

The 60-foot cable has an intentionally bare, uncrimped end. This allows the pulley, nylon stoppers, and clamps to slide onto the cable during setup, and lets the cable length be customized for the distance between the anchor points. The unfinished end is part of the setup design, not a damaged cable.

• The system uses a pulley to connect the runner to the overhead cable.
• Nylon stoppers and clamps help set and secure the chosen travel limits.
• The spring connects at one end of the trolley run.

What do I need to install the BV aerial pet trolley?

Install the trolley between stationary objects at both ends of the intended run, with the cable at least 6 feet (1.83 m) above the ground. Screw the hooks into the anchor points, attach the spring end to one hook, and thread the cable through the pulley and nylon stoppers before securing the other end.

Keep the cable taut while fastening the large clamps. Position the stoppers where you want the runner’s travel to end, then place a small clamp behind each stopper. Any excess cable can be cut off after the cable is secured. Choose fixed anchor points and an overhead route that suit the space you want the dog to use.

• Both ends of the run require stationary anchor points.
• Set the installation height to 6 feet (1.83 m) or higher above ground.
• Secure the cable with clamps and place stops to define the runner’s travel area.

The BV aerial pet trolley is suited to dog owners who want an overhead outdoor run for a dog within the 125 lb (56.7 kg) limit, with a defined area for movement and supervision. It is intended for an anchored trolley setup, not for walking a dog on a leash. Its steel cables, vinyl covering, pulley, spring, and adjustable stops make it a fit for yards and other outdoor locations with suitable fixed anchor points.