hygger 1060GPH Aquarium Water Pump, 33W Adjustable Submersible or External Return Pump

The hygger 1060GPH water pump is a 33W return pump for aquariums, ponds, fountains, sumps and hydroponics, with adjustable flow and a 13.1 ft (3.99 m) maximum head.

• 71 flow settings from 30% to 100% — adjust the pump’s output to suit your setup.
• Submersible or external operation, with fittings for 1 in (2.54 cm) or 3/4 in (1.91 cm) pipes — choose a suitable connection for your plumbing.
• Automatic shutoff when water is absent or too low, plus two removable intake screens — select a screen for a normal or low water level.
• External LED controller with Up, Down and Pause buttons — change or pause the pump from the controller.
• Ceramic shaft and magnetic drive, with no copper element — made for fresh or salt water.

Use this return pump when you need water movement in an aquarium, pond, fountain, sump or hydroponic system. Its adjustable output and choice of submerged or external placement let you configure it for different setups. The controller is not waterproof and must be kept indoors, so plan its location separately from the pump.

How do I adjust the water flow?

The external controller lets you select one of 71 flow settings between 30% and 100% of the pump’s top speed. Use the Up and Down buttons to change the setting, or press Pause to stop the pump’s flow. The pump switches on when plugged in and off when unplugged.

• Input: 100–240V, 50/60Hz; output: DC 24V.
• Power consumption: 33W.
• Maximum flow: 1060GPH (approximately 4,012 L/h).

Can I use this pump submerged or outside the water?

Yes, the hygger pump supports both submerged and external installation. It comes with pipe connection fittings for 1 in or 3/4 in pipes. The pump measures 6.2 x 3.1 x 5 in (15.7 x 7.9 x 12.7 cm), so compare those dimensions with the space available for your setup.

• The cord from the pump to the controller is 6 ft (1.83 m).
• The power cord is 6.6 ft (2.01 m).
• The controller is not waterproof; place it indoors.
• A 10 ft (3.05 m) extension cord is needed when extending the distance between the controller and pump.

What happens if the water level drops?

The pump automatically shuts off when it senses no water or a water level that is too low. Two removable intake screens are provided: one for a normal water level and one for a low water level. For the low-level screen, the water must be higher than 0.8 in (2.03 cm).

• Choose the screen that suits the water level where the pump will operate.
• The ceramic shaft and magnetic drive are designed to support a long service life.
• The pump has no copper element and can be used in fresh or salt water.

This hygger return pump suits aquarium, pond, fountain, sump and hydroponic setups that need adjustable water flow and a choice of submerged or external placement. It is a practical fit when the controller can stay indoors and the pump’s dimensions and pipe connections match the installation.