PAWNISAW Dog Runner Cable System, 30.5 m + 3 m Red Stainless Steel with Spring Buffer

PAWNISAW Dog Runner Cable is an outdoor tie-out trolley system for giving dogs room to move while keeping them within a secured area, with a 100 ft (30.48 m) anchor cable and a 10 ft (3.05 m) spring-equipped runner.

• Stainless steel cables — made for outdoor running and pulling.
• 100 ft (30.48 m) anchor cable plus 10 ft (3.05 m) runner — provides a long run line and a separate moving lead.
• Runner cable with zipline design and buffer spring — helps reduce tangling and cushions sudden runs.
• Tree sling, turnbuckle, stoppers, U clamps and screw hooks included — supports different outdoor anchoring setups.
• Eye-catching red cable — makes it easier to spot the line and locate your dog.

Set up a designated outdoor run space in a yard, garden, courtyard or suitable open area. The system is made for supervised outdoor movement and can also be used for dog training, behavior modification and chase-circuit games. Its long cable arrangement gives dogs room to run while helping keep them visible within the chosen area.

What comes with the PAWNISAW Dog Runner Cable?

The set includes the cables and hardware needed to assemble the tie-out system. You receive one 100 ft anchor cable with a turnbuckle, one 3.7 ft (1.13 m) cable sling, and one 10 ft runner cable with a spring. The hardware includes two stoppers, two U clamps and two screw hooks.

The cable sling is intended for installation between trees and is designed to avoid harming them. Screw hooks provide another way to fasten the setup to a wall or another place where a hook can be secured.

• One 100 ft cable with turnbuckle
• One 3.7 ft cable sling and one 10 ft spring runner
• Two stoppers, two U clamps and two screw hooks

How does the PAWNISAW Dog Runner Cable give a dog room to move?

The 100 ft anchor cable forms the main line, while the 10 ft runner travels along it in a zipline-style arrangement. This layout is designed to make the runner less prone to tangling and leave room for movement. A buffer spring on the runner cable cushions a sudden burst of running.

The stainless steel cable is described as rust-proof and suited to supporting a dog’s running and pulling. The red finish also makes the cable easier to see outdoors. Attach the runner to a dog’s collar or harness to let the dog move along the installed line.

• Separate anchor line and moving runner
• Spring buffer on the runner cable
• Runner attaches to a collar or harness

How do you install the PAWNISAW Dog Runner Cable?

For a tree setup, secure the cable sling around a tree and connect the turnbuckle to one end. Thread the 100 ft cable through a stopper, the runner cable, a second stopper and the U clamps, in that order. Wrap the main cable around the other tree, feed it through the U clamps, tighten their nuts and secure the line to prevent sliding. The screw hooks can be used where a suitable wall or other fastening point is available.

Once the main line is installed, clip the 10 ft runner to the dog’s collar or harness. Choose an outdoor area with suitable fastening points for the intended setup.

• Attach the sling and turnbuckle before routing the main cable.
• Use the U clamps to secure the cable and limit sliding.
• Clip the runner to a collar or harness after installation.

The PAWNISAW Dog Runner Cable suits owners setting up an outdoor run for supervised play, training or chase-circuit games. It combines a long anchor line, a spring-equipped moving runner and hardware for tree or hook-based installation. It is an outdoor tie-out system designed to give a dog room to move while keeping the dog within sight.