PAWNISAW Dog Runner Cable Tie-Out Trolley System, 30.5 m + 3 m Red with Spring

PAWNISAW Dog Runner Cable is an outdoor tie-out trolley system designed to give dogs room to move while keeping them connected, with a 100 ft (30.48 m) main cable and a 10 ft (3.05 m) spring-equipped runner.

• Stainless steel cables — provide an outdoor tether for running and pulling.
• Zipline-style runner with a buffer spring — allows movement along the line and cushions sudden bursts.
• Eye-catching red cable — makes it easier to spot the line and locate your dog.
• Tree sling, turnbuckle, stoppers, U clamps and screw hooks included — supplies hardware for setting up the system.
• Suitable for outdoor play and training — supports yard use, behavior modification and chase-circuit games.

For outdoor time in a garden, courtyard or other open area, this trolley system gives a dog a broader path to move than a fixed tie point while helping prevent the dog from wandering off. Its layout uses a long anchored cable as the route and a shorter runner attached to the dog’s collar or harness. It is intended for outdoor movement and activities such as training, behavior modification and chase-circuit play.

How much room does the trolley system provide?

The main cable spans 100 ft (30.48 m), while the attached runner cable measures 10 ft (3.05 m). The runner travels along the main line in a zipline-style arrangement, which is designed to reduce tangling and avoid restricting the dog’s movement. A buffer spring on the runner helps cushion sudden movement when a dog bursts into a run.

• The runner attaches to either a collar or a harness.
• The spring is positioned on the runner cable to absorb the jolt of a sudden run.

Where can the cable be anchored?

Set the system between trees with the cable sling, or use the screw hooks at walls and other places where they can be fastened. The sling provides a way to attach the line to a tree without hurting it; screw hooks offer another anchoring method for suitable surfaces.

• The included sling measures 3.7 ft (1.13 m).
• Use the supplied U clamps and nuts to secure the main cable and help prevent it from sliding.

What is included in the PAWNISAW set?

The package contains one 100 ft tie-out cable with a turnbuckle, one 3.7 ft cable sling, one 10 ft lead runner cable with a spring, two stoppers, two U clamps and two screw hooks. The turnbuckle connects the main cable to the sling, and the stoppers are threaded onto the main line around the runner assembly.

• One turnbuckle for connecting the cable and sling.
• Two stoppers, two U clamps and two screw hooks for the setup.

How do you set up and use the runner?

Attach the sling to a tree, then connect the turnbuckle to one end of the sling. Thread a stopper, the runner cable, a second stopper and the U clamps onto the main cable in that order. Wrap the cable’s end around the tree, thread it through the U clamps and tighten their nuts so the line stays in place.

• Secure the main line before clipping the runner to the dog.
• Fasten the runner to the dog’s collar or harness to allow movement along the cable.

PAWNISAW Dog Runner Cable suits dog owners setting up outdoor space for tethered movement, play or training, especially where a tree or another secure fastening point is available. Its stainless steel cable system, sliding runner and spring buffer combine a broad outdoor route with a connection to the dog’s collar or harness. It is an outdoor tie-out system for movement along an anchored line.