ToLanbbt Automatic Horse Water Bowl, 2.5 L Stainless Steel Float-Valve Waterer

ToLanbbt Automatic Animal Water Dispenser is a stainless steel drinking bowl for livestock and pets, with a float valve that refills its 2.5 L bowl as the water level drops.

• Float-controlled automatic refill — keeps water at a consistent level for animals to drink.
• 2.5 L capacity — provides a drinking bowl for farm, pasture, yard, and outdoor use.
• Stainless steel bowl with smooth edges and a float-protecting baffle — helps protect animals and the valve area during use.
• Bottom drainage hole with removable plug — lets you empty the bowl for cleaning.
• Includes a hose, 3/4-inch connector, and two expansion screws — supplies key parts for connection and mounting.
• Manufacturer claims water-saving efficiency can exceed 30% — the float valve replenishes water as its level falls.

For animals using an outdoor trough or bowl, keeping drinking water available can mean frequent manual refilling. This automatic waterer is designed for farm, pasture, and yard settings, where its float valve responds to a falling water level and restores the supply. It can serve animals including horses, cattle, goats, sheep, pigs, chickens, ducks, and dogs.

How does the automatic refill work?

The float valve controls water inflow to maintain the bowl’s level, and the bowl refills automatically when the water level drops. The valve can be installed on the left or right side, using the bowl’s side openings to suit your setup. Adjust the float valve to the right position during installation to help avoid overflow.

• Water level is controlled by a float valve.
• Left- or right-side valve placement is available.
• The bowl holds 2.5 L.

What comes with the ToLanbbt animal water bowl?

The set contains one water bowl with float valve, one hose, one 3/4-inch (1.905 cm) hose connector, and two expansion screws. The connector fits 3/4-inch (1.905 cm) faucets; the supplied hose is 1/2-inch (1.27 cm). Two screws are used to secure the bowl where you want it installed.

• One stainless steel bowl with float valve.
• One hose and one faucet connector.
• Two expansion screws for mounting.

How do you install and clean the waterer?

Secure the bowl with the two screws, connect the hose, and set the float valve before use. Wear gloves during installation and wrap 3–4 layers of tape around the hose connector before connecting it to help prevent leaks. Use a tool to open the drain plug the first time; after that, unscrew the plug to let water out through the bottom drainage hole when cleaning.

• A bottom drain makes it possible to empty the bowl for cleaning.
• A baffle helps keep the float from being bitten or caught in incoming debris.
• Smooth bowl edges help reduce the risk of animals being scratched while drinking.

The stainless steel bowl is designed to be less prone to deformation and rust, with a baffle protecting the float area. It suits people caring for livestock or pets in outdoor settings who want an automatically replenished drinking bowl with a drain for cleaning. Its float-controlled refill, included hose and connector, and screw-mounted design make it a practical fit for animal watering rather than feed dispensing.