DODAER Dog Clipper Blade Set, Black 3-Piece 7FC, 5FC and 4FC Stainless Steel

The DODAER black detachable dog clipper blade set is made for grooming dog coats, with 440C stainless-steel blades and three cutting lengths.

• 7FC, 5FC and 4FC cutting lengths: 1/8 in (3.2 mm), 1/4 in (6.3 mm) and 3/8 in (9.5 mm) — choose a blade for the desired finished length.
• Compatible with Andis dog clippers, most Oster A5 clippers and Wahl KM10 Series dog clippers — fits several named clipper lines.
• 440C stainless-steel comb blades — made with a material specified as sharp and high in hardness.
• Water does not rust the blades; they are more heat resistant than traditional carbon-steel processing and make less noise in use.
• One blade each: 7FC, 5FC and 4FC — gives you three cutting-length options in one set.

Choosing a clipper blade is about matching the blade to both your clipper and the coat length you want to leave. This set brings three fixed cutting lengths together for dog grooming, with compatibility across selected Andis, Oster and Wahl clipper models. Its detachable format lets you use the individual blades with compatible clippers.

What cutting lengths do the DODAER blades leave?

The three DODAER blades cut to 1/8 in (3.2 mm), 1/4 in (6.3 mm) and 3/8 in (9.5 mm). The 7FC blade provides the shortest cut, the 5FC gives the middle length, and the 4FC leaves the longest of the three. Choose according to the finished coat length you are aiming for; these figures are the blade cutting lengths.

• 7FC: 1/8 in (3.2 mm)
• 5FC: 1/4 in (6.3 mm)
• 4FC: 3/8 in (9.5 mm)

Which clippers are these detachable blades compatible with?

The DODAER blades fit Andis dog clippers, most Oster A5 dog clippers and Wahl KM10 Series dog clippers. Compatibility is model-dependent, particularly for Oster A5, so match your clipper model to these supported lines before choosing the set.

• Andis dog clippers
• Most Oster A5 dog clippers
• Wahl KM10 Series dog clippers

What are the DODAER blades made from, and how do they perform?

The comb blades are made from 440C stainless steel. The material is characterized by sharpness and high hardness, and water does not rust the blades. Compared with traditional carbon-steel processing, the blades are more heat resistant and make less noise during use.

• 440C stainless-steel comb construction
• Designed for lower-noise use
• More heat resistant than traditional carbon-steel processing

This set suits dog owners and groomers whose clipper models match the supported Andis, Oster A5 or Wahl KM10 lines and who want three fixed coat-length choices. It is a three-blade detachable set for those specific clipper families, with cutting lengths from 1/8 in (3.2 mm) to 3/8 in (9.5 mm).